steering coloum bulkhead
#1
Scooby Regular
Thread Starter
Join Date: Jul 2015
Location: bristol
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
steering coloum bulkhead
hi i got a problem with steering coloum were it goes through bulkhead/firewall.
its just pi--ing in the wind as it goes through,is bolted steering wheel end. there a white looks nylon bush or similar at end of coloum before it goes through bulkhead should that be fixed to the car.
car 2000sti jdm. with adjustable coloum .
cheers dan
its just pi--ing in the wind as it goes through,is bolted steering wheel end. there a white looks nylon bush or similar at end of coloum before it goes through bulkhead should that be fixed to the car.
car 2000sti jdm. with adjustable coloum .
cheers dan
#2
Scooby Regular
Join Date: Oct 2010
Location: Kings Norton, birmingham
Posts: 1,094
Likes: 0
Received 0 Likes
on
0 Posts
Got this on my classic too. Got no reply to my question so sort of figured out there should be a large grommet type ring with grooves around its outer edge to fit into the hole and hold the plastic or nylon bush in place. Tried contacting a Subaru dealer and he didnt even know what the bulkhead was, never mind locate the replacement rubber seal
#3
Scooby Regular
Thread Starter
Join Date: Jul 2015
Location: bristol
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Got this on my classic too. Got no reply to my question so sort of figured out there should be a large grommet type ring with grooves around its outer edge to fit into the hole and hold the plastic or nylon bush in place. Tried contacting a Subaru dealer and he didnt even know what the bulkhead was, never mind locate the replacement rubber seal
cheers
#5
Scooby Regular
Thread Starter
Join Date: Jul 2015
Location: bristol
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
yeah bit shifty at speed. had look at mine seems i have a rubber grommet that it sits in other owner must of removed it and couldnt fit back .had a quick go bit of a b--ch have to lube it up ha ha, that be tomorrows adventurer now. i get back with any results
cheers
cheers
#6
Scooby Regular
iTrader: (2)
Join Date: Oct 2002
Location: oop north in a spec-c.Now sold and starting on a classic ra track/sprint/road car
Posts: 2,536
Likes: 0
Received 7 Likes
on
7 Posts
hi i got a problem with steering coloum were it goes through bulkhead/firewall.
its just pi--ing in the wind as it goes through,is bolted steering wheel end. there a white looks nylon bush or similar at end of coloum before it goes through bulkhead should that be fixed to the car.
car 2000sti jdm. with adjustable coloum .
cheers dan
its just pi--ing in the wind as it goes through,is bolted steering wheel end. there a white looks nylon bush or similar at end of coloum before it goes through bulkhead should that be fixed to the car.
car 2000sti jdm. with adjustable coloum .
cheers dan
Trending Topics
#8
Scooby Regular
Thread Starter
Join Date: Jul 2015
Location: bristol
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Its not fixed at that point there should be a rubber bung that it sits in where it goes through the bulkhead on the classics there are 2 different size holes in the bulkhead between the early RA prefacelift and the later classics cant remember off the top of my head which way round it was tho.
#9
Scooby Regular
Thread Starter
Join Date: Jul 2015
Location: bristol
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM