Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Knock Link feedback..... 120 mph then coast then floor it...and what lights up?

Thread Tools
 
Search this Thread
 
Old Mar 1, 2002 | 11:32 PM
  #1  
FOZ STiV5's Avatar
FOZ STiV5
Thread Starter
Scooby Regular
 
Joined: Feb 2002
Posts: 112
Likes: 0
Question

Hi all,

Just want quick feedback from owners with knock links set at max sensitivity and with the piezo mic located under the IC on the block.

I never get anything but the first LED unless I repeatedly floor the throttle at say 120 then back off then floor and so on. If I do this I get a brief flash of the RED Knock LED. Could be transitional ... but would feel better if others see this to


l8r

Julian
Reply
Old Mar 1, 2002 | 11:35 PM
  #2  
Trout...'s Avatar
Trout...
Scooby Regular
 
Joined: May 2001
Posts: 1,835
Likes: 0
Post

If you never get any lights on max sensitivity I would move the knock link.

There is a nice tapped hole directly below the header tank which gives very good feedback for the piezo mic. The red lights you are seeing - no idea!

Trout
Reply
Old Mar 1, 2002 | 11:40 PM
  #3  
FOZ STiV5's Avatar
FOZ STiV5
Thread Starter
Scooby Regular
 
Joined: Feb 2002
Posts: 112
Likes: 0
Post

Cheers trout


The Reds are hardly ever and only if I do as I said in the thread start..honest. never see a red under 110 mph regardless of how I drive.

Under the header tank??? on an STi too?? I am on the block now.

Julian

Reply
Old Mar 2, 2002 | 01:25 PM
  #4  
lumby's Avatar
lumby
Scooby Regular
 
Joined: Jan 2001
Posts: 534
Likes: 0
Post

Is it easy to fit a knock link , I have fitted adjustable boost today , and got some serious pinking at one stage , wound boost right back down but feel I need a knocklink before i tinker with it again.

thanks
Reply
Old Mar 2, 2002 | 02:09 PM
  #5  
SecretAgentMan's Avatar
SecretAgentMan
Scooby Regular
 
Joined: Dec 2000
Posts: 2,912
Likes: 0
Post

It's very easy, all it takes is some basic knowledge in how to use a spanner....and what +12VDC and ground is.



Let me know if you need more help.

Scoobymania has a very nice "knocklink" of their own, with a small LED bar instead of the bulky Link one.



/J
Reply
Old Mar 2, 2002 | 06:33 PM
  #6  
FOZ STiV5's Avatar
FOZ STiV5
Thread Starter
Scooby Regular
 
Joined: Feb 2002
Posts: 112
Likes: 0
Post

It is easy, but your choice of where yoou mount the mic can make it a bit tricky.

I mounted mine under the IC ...this is the recommeded location. You need to remove the IC to do this.

Julian
Reply
Old Mar 2, 2002 | 09:35 PM
  #7  
john banks's Avatar
john banks
Scooby Regular
 
Joined: Nov 2000
Posts: 18,658
Likes: 1
From: 32 cylinders and many cats
Post

Lumby don't say I didn't warn you! I would leave well alone if you are hearing pinking!
Reply
Old Mar 3, 2002 | 02:02 AM
  #8  
WREXY's Avatar
WREXY
Scooby Regular
 
Joined: Feb 2001
Posts: 2,833
Likes: 0
From: Greece, previously Syd Australia
Post

Julian,

Go to this link and read Jan Shims post. There is instructions and pic there too of where and how to fit the sensor.

http://i-club.com/forums/showthread....threadid=72454


On mine, I only get the first green light say above 5500 lighting up. It doesn't fluctuate it is steady. I can't remeber if it was Bob Rawle or Pete Croney that said one green steady light at higher revs is normal engine noise.

Hope this helps,

Cheers,

Wrexy.
Reply
Old Mar 3, 2002 | 08:10 AM
  #9  
SecretAgentMan's Avatar
SecretAgentMan
Scooby Regular
 
Joined: Dec 2000
Posts: 2,912
Likes: 0
Post

The mic will pic up engine noise, and I've seen as far as 2:nd green light up around 7000 on my car (when logging from the link it's usually around ~20-ish on the knock column - noisy subaru lumps ).

Your Big Red (tm) lit up on liftoff didn't it?

/J
Reply
Old Mar 3, 2002 | 11:07 AM
  #10  
lumby's Avatar
lumby
Scooby Regular
 
Joined: Jan 2001
Posts: 534
Likes: 0
Post

John

It might be my ears but thinking on the noise, could have been wastegate flutter as the engine didnt go bang !

The car was pulling about 1.0 bar, no boost cut I would have thought it could take 1.0 bar its run on optimax all the time .

i think i will need to get it set up by a technician, even the length of hose you use seems to influence how much pressue there is !




Reply
Old Mar 3, 2002 | 11:11 AM
  #11  
john banks's Avatar
john banks
Scooby Regular
 
Joined: Nov 2000
Posts: 18,658
Likes: 1
From: 32 cylinders and many cats
Post

It is an imprecise art unfortunately. Det does sound unlikely, but you can't be too cautious. With a Knocklink it would be much more reassuring as long as it is working properly
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SilverM3
ScoobyNet General
8
Feb 24, 2021 01:03 PM
shorty87
Full Cars Breaking For Spares
19
Dec 22, 2015 11:59 AM
alcazar
Non Scooby Related
3
Sep 28, 2015 12:02 AM
B0DSKI
Non Car Related Items For sale
2
Sep 27, 2015 06:58 PM
shorty87
Other Marques
0
Sep 25, 2015 08:52 PM




All times are GMT +1. The time now is 06:38 PM.