People with Subaru 4 pots, please help.
Trending Topics
#9
Are you a mind reader Matt????? Yep, still trying to get some better brakes behind my wheels. I can get some 5mm shims form rally design (i.e take the wheel to ET50mm) and i wanted to know if that would give the required clearance (on the standard size 294mm discs).
Can't measure my wheel clearance at the mo cos my alloys are being refurbished tho .
Tony.
Can't measure my wheel clearance at the mo cos my alloys are being refurbished tho .
Tony.
#11
Scooby Regular
Join Date: Apr 2001
Location: Chester
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Hiya tony,
Yeah 5mm could be a little close mate. I think 7mm would be more like it.
I have the measurements for this. If i get them before you get your wheels back i'll let you know.
Matt.
Yeah 5mm could be a little close mate. I think 7mm would be more like it.
I have the measurements for this. If i get them before you get your wheels back i'll let you know.
Matt.
#12
Cheers guys,
Matt, if you can give me the measurments that would be great. I'll try and get the tape measure out myself tomorrow too when ive got the wheels back on.I probably would have gone for 7mm shims but rally design only have 5mm and 10mm available.
Ron, thats my plan of attack. But first i want to get a rough idea of the minimum size needed, order one then try it on someone's car (anybody in the manchester area want to be kind enough ).
Tony.
Tony.
[Edited by Tone Loc - 5/18/2002 5:21:24 PM]
Matt, if you can give me the measurments that would be great. I'll try and get the tape measure out myself tomorrow too when ive got the wheels back on.I probably would have gone for 7mm shims but rally design only have 5mm and 10mm available.
Ron, thats my plan of attack. But first i want to get a rough idea of the minimum size needed, order one then try it on someone's car (anybody in the manchester area want to be kind enough ).
Tony.
Tony.
[Edited by Tone Loc - 5/18/2002 5:21:24 PM]
#13
Scooby Regular
Join Date: Apr 2001
Location: Chester
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Tony,
Sorry mate cant find/remember all the measurements taken. But from the face of the disc to the inside of the spokes its 47mm(think that was at its narrowest point at the edge of the rim but the caliper wouldnt be that far out) So you need 8mm extra (caliper is 55mm) so it looks like a 10mm spacer with longer wheel studs to be sure they'd clear.
Although the speedlines for the foresters are ET48 (i think...shockin memory) so you should really only need 7mm.
Sorry it's all abit vague but forgot the measurements taken before i got my new brakes.
Do you want these brakes that much ?
Matt
Sorry mate cant find/remember all the measurements taken. But from the face of the disc to the inside of the spokes its 47mm(think that was at its narrowest point at the edge of the rim but the caliper wouldnt be that far out) So you need 8mm extra (caliper is 55mm) so it looks like a 10mm spacer with longer wheel studs to be sure they'd clear.
Although the speedlines for the foresters are ET48 (i think...shockin memory) so you should really only need 7mm.
Sorry it's all abit vague but forgot the measurements taken before i got my new brakes.
Do you want these brakes that much ?
Matt
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM
Sub-Subaru
General Technical
1
28 September 2015 12:47 PM