Tracking
#1
Scooby Regular
Thread Starter
Tracking
Please dont laugh, I know that you can have the front wheels tracked to make sure they are running straight etc.
But can you do the back, only because one of my tyre's is going bald on one edge. As if the tracking is out on the back.
I dont know tho
Claire
But can you do the back, only because one of my tyre's is going bald on one edge. As if the tracking is out on the back.
I dont know tho
Claire
#3
Scooby Regular
yes there are camber and tracking adjustments alround on a Subaru..........
the actual equipment used means little, make sure the operator can actually set the car up how its required
alyn
the actual equipment used means little, make sure the operator can actually set the car up how its required
alyn
#4
Hi
As standard a Classic Impreza can have the front toe adjusted (commonly referred to as tracking), rear toe and front camber. To adjust the rear camber the car would require adjustable camber bolts, Eibach ones are £19.99 if required.
Always use a company who has a decent set up, Hunter (which we have) or John Beam. And as Alyn says, someone who is competent using their system.
If you have any queries regarding this don't hesitate to give me a call.
Thanks
Keith
www.revolution247.com
0191 4619200
As standard a Classic Impreza can have the front toe adjusted (commonly referred to as tracking), rear toe and front camber. To adjust the rear camber the car would require adjustable camber bolts, Eibach ones are £19.99 if required.
Always use a company who has a decent set up, Hunter (which we have) or John Beam. And as Alyn says, someone who is competent using their system.
If you have any queries regarding this don't hesitate to give me a call.
Thanks
Keith
www.revolution247.com
0191 4619200
#5
Scooby Regular
the rear can and is adjusted without camber bolts with a little imagination LOL
or maybe i have been imagining it all these years..............and just like most things old anologue stuff works just the same if you know how to work it
alyn
or maybe i have been imagining it all these years..............and just like most things old anologue stuff works just the same if you know how to work it
alyn
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM