welshy1979

got a bug eye wrx and need to change the discs and pads front and rear....can anyone point me in right direction for a guide or pics etx of any tricky bits?

chavadurkin

iTrader: (5)

It is proper easy to do.

The pads are held in with a couple of pins, and once they are out - the discs literally comes off.

It took me about 25 mins a wheel.........

If you are local to me - I can help you do it if you like?

C

welshy1979

Where abouts I from matey

Skooby53

iTrader: (1)

Have a look at this

https://www.scoobynet.com/wheels-tyr...rake-pads.html

When the pads are off remove the calliper by undoing the two nuts on the rear of the calliper. Gently remove and allow the calliper to hang free. The disc will just pull off, they may need a gentle tap but will soon free up. Clean the hub face to remove any debris allowing the disc to sit level on the hub. Just reverse the procedure to put it back together again. Good luck.

welshy1979

is it the same for the rears

his-n-her-scoobs

iTrader: (5)

No, you have to "un adjust" the handbrake before removing the rear discs.

Best to download the relevent manual from https://www.scoobynet.com/technical-...w-updated.html

and see https://www.scoobynet.com/wheels-tyr...rake-disc.html for how you can mess up. EXTRACT FROM MANUAL AT BOTTOM OF PAGE.






Easy job once you have read the instructions. Good Luck.

welshy1979

just bought yellow pads front and rear and grooved discs front and rear for £378......that a good deal u think?