Any wheel experts out there? Need offset advice
#1
Any wheel experts out there? Need offset advice
Just wondered if anyone could answer this. Im not too confident at working this stuff out and before i order some wheels, i just wanted to check the maths.
We have a car with a wide bodykit fitted. Someone else has the same car/kit and is using the following size wheels to fill out the arches:-
Front
17x8+24 (no spacers)
Rear
17x9+24 (10mm spacers)
What i would like to do is fit
17x8.5 front
17x9.5 rear
Now, the bit that confuses me. Because i want to fit wider wheels, how much will that affect the offset needed?
I dont want to fit big spacers, but dont mind upto 10mm, front or rear.
Anyone any good at working out this stuff?
We have a car with a wide bodykit fitted. Someone else has the same car/kit and is using the following size wheels to fill out the arches:-
Front
17x8+24 (no spacers)
Rear
17x9+24 (10mm spacers)
What i would like to do is fit
17x8.5 front
17x9.5 rear
Now, the bit that confuses me. Because i want to fit wider wheels, how much will that affect the offset needed?
I dont want to fit big spacers, but dont mind upto 10mm, front or rear.
Anyone any good at working out this stuff?
#3
Scooby Senior
iTrader: (3)
Join Date: Jun 2006
Location: Slowly rebuilding the kit of bits into a car...
Posts: 14,333
Likes: 0
Received 0 Likes
on
0 Posts
If you increase the rim width by 12mm (1/2 inch) then this will be split equally on the inner and outer dimensions, for the same offset. If you have a clearance issue on the inner (strut ?) then the offset needs to reduce by 6mm.
On the back, you could do with an offset of +8mm as this means no spacers are needed, a better solution if such wheels are available.
DunxC
On the back, you could do with an offset of +8mm as this means no spacers are needed, a better solution if such wheels are available.
DunxC
Thread
Thread Starter
Forum
Replies
Last Post
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM
The Joshua Tree
Computer & Technology Related
18
11 September 2015 09:24 PM