Brembo rear caliper shims
#1
Scooby Regular
Thread Starter
Join Date: Oct 2003
Location: East Yorkshire
Posts: 1,966
Likes: 0
Received 0 Likes
on
0 Posts
Brembo rear caliper shims
Been struggling for last month to stop my 03STi rear Brembos squealing (Fronts are AP and no prob). I have recently changed from DS2500 (no squeal) to Pagid Blue all round. I have copperslipped everything chamfered edges on the pads and the nasty shims are the right way round and they still squeal. Yesterday I left the shims out as a last resort and this has given some improvement but they still squeak a bit. Any ideas welcome. They'll get some serious welly at Elvington on 1st July and I'm hoping this will bed them in a bit better.
What is noticeable is that the brakes are noticeably less grabby and pedal feel is nicer. I reckon these shims tend to make the pistons lean very slightly in the bores and cause unnecessary stiction. Anyone else noticed this, I see some posts on here where people are looking for these shims as theirs are missing so other people must have left theirs out as well.
What is noticeable is that the brakes are noticeably less grabby and pedal feel is nicer. I reckon these shims tend to make the pistons lean very slightly in the bores and cause unnecessary stiction. Anyone else noticed this, I see some posts on here where people are looking for these shims as theirs are missing so other people must have left theirs out as well.
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM