version 9 sti pcd size
#1
Scooby Regular
Thread Starter
Join Date: May 2004
Location: Carmarthenshire
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
version 9 sti pcd size
does anyone know what the pcd size is for a late 04 plate sti it's the newer dash type so has the larger hub , seem to be having problems finding alloys , was looking at kei d2 but pcd is 5 x 100 and was told they wont fit . any ideas ? cheers
#2
Scooby Regular
04 plate is still on 100x5 PCD so no issues there, as to wether they'll clear the caliper is another matter??
STi's didn't change to 114.5x5 till 05 onwards...................
alyn
STi's didn't change to 114.5x5 till 05 onwards...................
alyn
#3
Scooby Regular
Thread Starter
Join Date: May 2004
Location: Carmarthenshire
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by stockcar
04 plate is still on 100x5 PCD so no issues there, as to wether they'll clear the caliper is another matter??
STi's didn't change to 114.5x5 till 05 onwards...................
alyn
STi's didn't change to 114.5x5 till 05 onwards...................
alyn
#4
Just get out and measure it.
Not totally straightforward as there's 5 studs (with an even number you just measure from the middle of one to the middle of the one opposite, that distance is the pcd). With the scoobie you need to imagine a circle thro the centre of the 5 studs (thats the pitch crcle) and measure from the middle of one stud to the circle half way between the two studs opposite (thats the pitch circle diameter, aka pcd).
Won't be totally accurate as you're guessing where the circle would go but as there are only two choices, 100mm (MY04 and older) or 114.5mm (MY05 and newer) you should be able to tell which it is.
Not totally straightforward as there's 5 studs (with an even number you just measure from the middle of one to the middle of the one opposite, that distance is the pcd). With the scoobie you need to imagine a circle thro the centre of the 5 studs (thats the pitch crcle) and measure from the middle of one stud to the circle half way between the two studs opposite (thats the pitch circle diameter, aka pcd).
Won't be totally accurate as you're guessing where the circle would go but as there are only two choices, 100mm (MY04 and older) or 114.5mm (MY05 and newer) you should be able to tell which it is.
Thread
Thread Starter
Forum
Replies
Last Post