version 9 sti pcd size
 

does anyone know what the pcd size is for a late 04 plate sti it's the newer dash type so has the larger hub , seem to be having problems finding alloys , was looking at kei d2 but pcd is 5 x 100 and was told they wont fit . any ideas ? cheers

04 plate is still on 100x5 PCD so no issues there, as to wether they'll clear the caliper is another matter??

STi's didn't change to 114.5x5 till 05 onwards...................

alyn

I think i've got the 05 model as it's got the dccd control and the new type centre console and have checked an 02 model and the studs are further apart on mine then the 02 model .

Just get out and measure it.

Not totally straightforward as there's 5 studs (with an even number you just measure from the middle of one to the middle of the one opposite, that distance is the pcd). With the scoobie you need to imagine a circle thro the centre of the 5 studs (thats the pitch crcle) and measure from the middle of one stud to the circle half way between the two studs opposite (thats the pitch circle diameter, aka pcd).

Won't be totally accurate as you're guessing where the circle would go but as there are only two choices, 100mm (MY04 and older) or 114.5mm (MY05 and newer) you should be able to tell which it is.