Brake Feel - Initial Bite ?
#1
Scooby Regular
Thread Starter
Join Date: Oct 2002
Location: North Staffs. UK
Posts: 2,046
Likes: 0
Received 0 Likes
on
0 Posts
Brake Feel - Initial Bite ?
What's the 'standard' favoured first upgrade on Sti Brakes (02 UK Model, Brembos) ?
The front disks are new and the brakes do ultimately work well, however, I'd like a better feel to them. The pedal is good and high, and doesn't sink too much under pressure, so I'm not sure that braided lines will add much - though I'll probably fit them soon enough anyhow.
I'm assuming, as the car is standard, that the current pads are stock. What do people run as an improved road pad ? I'd like something with a little more initial bite....
When I had my classic I ran Godspeed 335mm disks on Subaru 4 pots, initially with DS2500s. I later swapped these for Red-Stuffs, which I felt where better in this area - and provided plenty enough stopping power for my 'fast-road' needs.
Anyone with any experience of different pads on the Brembos ?
Thanks,
Mark
The front disks are new and the brakes do ultimately work well, however, I'd like a better feel to them. The pedal is good and high, and doesn't sink too much under pressure, so I'm not sure that braided lines will add much - though I'll probably fit them soon enough anyhow.
I'm assuming, as the car is standard, that the current pads are stock. What do people run as an improved road pad ? I'd like something with a little more initial bite....
When I had my classic I ran Godspeed 335mm disks on Subaru 4 pots, initially with DS2500s. I later swapped these for Red-Stuffs, which I felt where better in this area - and provided plenty enough stopping power for my 'fast-road' needs.
Anyone with any experience of different pads on the Brembos ?
Thanks,
Mark
#2
Scooby Regular
Join Date: Oct 2003
Location: East Yorkshire
Posts: 1,966
Likes: 0
Received 0 Likes
on
0 Posts
I've used DS2500 with the Brembos and was well happy with the results (fitted to front and back). Nice feel and worked from cold. I thought the Brembo pads were noisy and a little inconsistent.
#4
Scooby Regular
Thread Starter
Join Date: Oct 2002
Location: North Staffs. UK
Posts: 2,046
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Gents -
I ran DS2500s with my classic on 2 types of disk.
The only problem I ever had with DS2500s was with the Godspeeds - I had problems with deposit build up, as I don't think I was getting the pads warm enough, often enough.
I used them with the TSL disks I had before (also with the 4 pots) without any issue -
Sounds like I ought to give them another go with this newage.....
Mark
I ran DS2500s with my classic on 2 types of disk.
The only problem I ever had with DS2500s was with the Godspeeds - I had problems with deposit build up, as I don't think I was getting the pads warm enough, often enough.
I used them with the TSL disks I had before (also with the 4 pots) without any issue -
Sounds like I ought to give them another go with this newage.....
Mark
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM