Amateur Question - Which way round do Black Diamond Disks go?
09 March 2005, 10:42 PM
#1
Scooby Newbie
Thread Starter
Join Date: Feb 2005
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Amateur Question - Which way round do Black Diamond Disks go?
I have a set of black diamond grooved and x drilled disc, I put them on as the packets said, left on the left, right on the right. I assumed this was as viewed from the rear of the car (left nearside, right offside)
The grooves go from the centre of the hub and spiral towards the back of the car.
The reason i ask is that they tend to judder and are very noisy (ebc redstuff pads)
Stupid question but its bugging me
The grooves go from the centre of the hub and spiral towards the back of the car.
The reason i ask is that they tend to judder and are very noisy (ebc redstuff pads)
Stupid question but its bugging me
10 March 2005, 07:59 AM
#2
Scooby Regular
yep that appears to be correct..............they always mark them as if you were sat in the drivers seat.......................
when you look at the top part of the disc the groove on those should run from the centre towards the front of the car............
alyn
when you look at the top part of the disc the groove on those should run from the centre towards the front of the car............
alyn
Thread
Thread Starter
Forum
Replies
Last Post