flat4

after the measurement for the mounting brackets for the calipers - i'm being lazy as i could get under the car and measure it but thought i'd ask here first any chance it's 5.25" (133.4mm)?


kev

Godspeed Brakes

iTrader: (259)

No its 154mm

flat4

bloody would be

flat4

ok, quick re-think, can you get adapter brackets to fit the 133.4mm fixings?

Godspeed Brakes

iTrader: (259)

depends on the offsets of the 4 holes , if you try the caliper in place with what you are trying to do , and you can see the 4 holes then a bracket can be made , if you cant see the holes then it wont fit

flat4

quick bit off maths tells me i'm going to be 2-3mm too close

flat4

154mm, is that the same for 2 pot & 4 pot mountings?

Godspeed Brakes

iTrader: (259)

yes

flat4

gives me something to think about now, thanks

flat4

any idea of the mount centres of the mounting bracket to hub? just another thought, sounds like i might need a new mounting bracket with the correct caliper fixings

Godspeed Brakes

iTrader: (259)

er , thats the measurement I gave you , 154mm , what did you ask for then ?

flat4

there's the mounting bracket which you bolt the caliper onto and then the bracket bolts onto the hub - i need the hub to bracket mount centre measurement

Tone Loc

iTrader: (1)

Subaru brakes bolt directly to the hub.... or mine do. There is no bracket that bolts to the hub (unles you have one of Ian's 335mm kits for the subaru 4 pots).

I'm a little confused on what dimension you want?

Tony.

Godspeed Brakes

iTrader: (259)

Where the caliper carrier , or the lugs on the 4 pots bolt onto the hub , the spacing is 154mm

On the 2 pot calipers , the measurement from the caliper body to caliper carruer is 164mm

flat4

i thought there was a caliper mounting bracket that mounted onto the hub, i think might have to have a look tonite as i'm confusing myself now

Godspeed Brakes

iTrader: (259)

yes there is on the 2 pot calipers but not on the four pots

Tone Loc

iTrader: (1)

Ahh... if your looking at the 2 pots as Ian says i can see why you think they all use a caliper braket.

Tony.