2 pot's and 4 pot's
#1
Scooby Regular
Thread Starter
Join Date: Oct 2002
Location: the back of my car
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
do these 2 calipers share the same mounting points to the hub and do they both use the same size(294mm) rotors?
i ask because at the moment i'm running single pot calipers on my mk2 legacy and know that the 4 pot's bolt straight onto my hubs with no probs, i also know that the 294mm rotors bolt on too, however the standard rotors i have on at the moment are totaly shagged and need replacing as a matter of urgency but i cant seem to find any 4pot calipers to use with the bigger rotors so i wanted to know if i could use the 2pot's on the 294mm rotors untill i found some 4's then i would not need to buy a set of new small rotors to keep me legal and safe.
any advice welcomed, ta in advance.
i ask because at the moment i'm running single pot calipers on my mk2 legacy and know that the 4 pot's bolt straight onto my hubs with no probs, i also know that the 294mm rotors bolt on too, however the standard rotors i have on at the moment are totaly shagged and need replacing as a matter of urgency but i cant seem to find any 4pot calipers to use with the bigger rotors so i wanted to know if i could use the 2pot's on the 294mm rotors untill i found some 4's then i would not need to buy a set of new small rotors to keep me legal and safe.
any advice welcomed, ta in advance.
#4
i have some 277mm disks that have covered 3000 miles
you can have them for free if you're willing to collect from manchester
if not they are going in the bin
email as profile if you're interested
cheers
steve
edited to say, i've got 2 pots with mintex pads and standrad brake lines if you need them aswell
[Edited by killemonthecorners - 9/17/2003 9:28:53 PM]
you can have them for free if you're willing to collect from manchester
if not they are going in the bin
email as profile if you're interested
cheers
steve
edited to say, i've got 2 pots with mintex pads and standrad brake lines if you need them aswell
[Edited by killemonthecorners - 9/17/2003 9:28:53 PM]
#5
Erm, Legacy GTB's have 2-pot 294mm brakes on the front, and single pot 277mm brakes on the rear.
And the 4-pot calipers for 294mm discs fit straight onto Legacy GTB hubs.
Rich.
And the 4-pot calipers for 294mm discs fit straight onto Legacy GTB hubs.
Rich.
#7
I think they are. Took quite a bit of research on Scoobyworld's part to track down some brake pads...
294mm discs tend to point to 4-pot STI Impreza on most cross-references. And 2-pot Subaru brakes tend to point to the 277mm discs.
But the Legacy GTB has 294mm discs with 2-pots, and 277mm discs with single pots on the back.
They could be better though, as stopping a big heavy Legacy with 280bhp under the bonnet takes some effort! When I can afford it, I'll swap to 4-pots on the front.
Rich.
294mm discs tend to point to 4-pot STI Impreza on most cross-references. And 2-pot Subaru brakes tend to point to the 277mm discs.
But the Legacy GTB has 294mm discs with 2-pots, and 277mm discs with single pots on the back.
They could be better though, as stopping a big heavy Legacy with 280bhp under the bonnet takes some effort! When I can afford it, I'll swap to 4-pots on the front.
Rich.
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM
Matt_182
Wheels, Tyres & Brakes
19
07 October 2015 01:05 PM