New discs/pads/lines - soft pedal
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: Co Durham
Posts: 1,659
Likes: 0
Received 0 Likes
on
0 Posts
Sorry if this has been done before, but need advice!
Had the front brakes done on my car in the form of EBC redstuff pads, EBC discs, braided hoses and DOT5.1 fluid.
I've only done about a 100 miles on them but the pedal is very soft when , with the braided hoses etc, I was expecting a firm pedal.
Is this usual with either this combination or when you have everything new (i.e discs/pads/hoses) as is the case here. If anybody who has used this combination of discs/pads could let me know how they got on I would appreciate it.
Just want an indication of whether this will improve with time and if this is all part of the bedding in process (and if so how long), or whether it's worthwhile getting the system bled again.
Cheers
Phil
Had the front brakes done on my car in the form of EBC redstuff pads, EBC discs, braided hoses and DOT5.1 fluid.
I've only done about a 100 miles on them but the pedal is very soft when , with the braided hoses etc, I was expecting a firm pedal.
Is this usual with either this combination or when you have everything new (i.e discs/pads/hoses) as is the case here. If anybody who has used this combination of discs/pads could let me know how they got on I would appreciate it.
Just want an indication of whether this will improve with time and if this is all part of the bedding in process (and if so how long), or whether it's worthwhile getting the system bled again.
Cheers
Phil
#3
Scooby Regular
Join Date: Aug 2000
Location: Where age and treachery reins over youthful exuberance
Posts: 5,275
Likes: 0
Received 0 Likes
on
0 Posts
Phil, whatever possessed you to go for those discs and pads
But the problem is surely air in the pipes and they need bleeding. Who did the fitting? They really shouldn't be letting cars out in that state. Apologies if you did it
Richard.
But the problem is surely air in the pipes and they need bleeding. Who did the fitting? They really shouldn't be letting cars out in that state. Apologies if you did it
Richard.
#4
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: Co Durham
Posts: 1,659
Likes: 0
Received 0 Likes
on
0 Posts
Hoppy - no, wasn't me that did it!
Take it you don't approve of EBC stuff?
I'll take the car back and have the re-bled done as I was expecting a firm pedal. See what happens after that.
Phil
Take it you don't approve of EBC stuff?
I'll take the car back and have the re-bled done as I was expecting a firm pedal. See what happens after that.
Phil
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
matt12
ScoobyNet General
59
08 November 2015 09:15 PM