Set of 17 x 7 Raceline RL7 & 17 x 7 Pro Race 1.2 both with tyres
#1
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Mar 2003
Location: Aberdeen, White Classic Wagon, 6-Speed, Track Car
Posts: 788
Likes: 0
Received 0 Likes
on
0 Posts
Set of 17 x 7 Raceline RL7 & 17 x 7 Pro Race 1.2 both with tyres
17 x 7 Raceline RL7 Wheels in Anthracite finish with Dunlop Slicks (Slicks used but wheels refurbed and not marked) - TPMS valves £400
17 x 7 Team Dynamics Pro Race 1.2 Lightweights in matt black powdercoat finish with Toyo R888 Tyres - 215/45/17 SOLD
The finish on the wheels is good but they have had track use and there a couple of rim marks by the trailer when loading. They are pictured below. Not too bad really. The 888's are one Ring trip old and one Knockhill trackday. Nowhere near the limits as yet.
PRO RACE 1.2's are SOLD to johnwizz
Both sets located in Aberdeen. I can ship to you but we would need to agree a price for that outside the cost of the wheels.
Thanks
James
17 x 7 Team Dynamics Pro Race 1.2 Lightweights in matt black powdercoat finish with Toyo R888 Tyres - 215/45/17 SOLD
The finish on the wheels is good but they have had track use and there a couple of rim marks by the trailer when loading. They are pictured below. Not too bad really. The 888's are one Ring trip old and one Knockhill trackday. Nowhere near the limits as yet.
PRO RACE 1.2's are SOLD to johnwizz
Both sets located in Aberdeen. I can ship to you but we would need to agree a price for that outside the cost of the wheels.
Thanks
James
Last edited by RS2 JIM; 18 October 2013 at 12:14 PM.
#6
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Mar 2003
Location: Aberdeen, White Classic Wagon, 6-Speed, Track Car
Posts: 788
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. Yes, they do clear the Brembo's albeit narrowly without spacers. I actually ran spacers anyway to give the car a better stance. They were either 5mm or 8mm hubcentric ones from Eibach. They've gone to someone else now though so if you want spacers you'll need to source yourself.
As Marc said above they're for a classic so 5 x 100 but i'm not certain on ET myself. I'll pull one down from the rack tonight and check. I suspect ET32 as that rings a bell but could be utter nonsense!
Thanks Marc!
As Marc said above they're for a classic so 5 x 100 but i'm not certain on ET myself. I'll pull one down from the rack tonight and check. I suspect ET32 as that rings a bell but could be utter nonsense!
Thanks Marc!
Trending Topics
#8
Scooby Regular
iTrader: (6)
i loved my racelines on my old classic - lovely wheel, rare in subaru fitment & strong as hell wheel
http://i5.photobucket.com/albums/y18...t001/RL7-1.jpg
http://i5.photobucket.com/albums/y18...t001/RL7-2.jpg
pretty certain the et is something like et45 or et48, they sat just a tiny bit further out than the speedline st2's which where et53
http://i5.photobucket.com/albums/y18...t001/RL7-1.jpg
http://i5.photobucket.com/albums/y18...t001/RL7-2.jpg
pretty certain the et is something like et45 or et48, they sat just a tiny bit further out than the speedline st2's which where et53
Last edited by Gambit; 18 October 2013 at 12:34 PM.
#9
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Mar 2003
Location: Aberdeen, White Classic Wagon, 6-Speed, Track Car
Posts: 788
Likes: 0
Received 0 Likes
on
0 Posts
Gambit,
Many thanks for that. Your car looked good on them!
I was clearly spouting nonsense on the offset! Will check this evening.
Many thanks for that. Your car looked good on them!
I was clearly spouting nonsense on the offset! Will check this evening.
#10
Scooby Regular
iTrader: (10)
Join Date: Oct 2007
Location: Up North
Posts: 625
Likes: 0
Received 0 Likes
on
0 Posts
Have RL7 on my Blobeye, great wheels, wish these were 114.3 PCD I'd have had them off you. Can't remember offset of mine, pretty sure they're 45 or something, like said above, sit a little further out than standard wheels, so nice fit.
Last edited by ATWRX; 18 October 2013 at 02:23 PM.
#14
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Mar 2003
Location: Aberdeen, White Classic Wagon, 6-Speed, Track Car
Posts: 788
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for delay. I couldn't see the markings on the wheels so spoke to the chap I bought them from and he advises they're an ET48.
Hope this helps.
Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM