ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Wheels And Tyres For Sale (https://www.scoobynet.com/wheels-and-tyres-for-sale-446/)
-   -   Set of 17 x 7 Raceline RL7 & 17 x 7 Pro Race 1.2 both with tyres (https://www.scoobynet.com/wheels-and-tyres-for-sale-446/987958-set-of-17-x-7-raceline-rl7-and-17-x-7-pro-race-1-2-both-with-tyres.html)

RS2 JIM 17 October 2013 05:01 PM

Set of 17 x 7 Raceline RL7 & 17 x 7 Pro Race 1.2 both with tyres
 
4 Attachment(s)
17 x 7 Raceline RL7 Wheels in Anthracite finish with Dunlop Slicks (Slicks used but wheels refurbed and not marked) - TPMS valves £400

17 x 7 Team Dynamics Pro Race 1.2 Lightweights in matt black powdercoat finish with Toyo R888 Tyres - 215/45/17 SOLD
The finish on the wheels is good but they have had track use and there a couple of rim marks by the trailer when loading. They are pictured below. Not too bad really. The 888's are one Ring trip old and one Knockhill trackday. Nowhere near the limits as yet.

PRO RACE 1.2's are SOLD to johnwizz

Both sets located in Aberdeen. I can ship to you but we would need to agree a price for that outside the cost of the wheels.

Thanks

James

jiha4 17 October 2013 05:49 PM

Will the pro race clear brembos?

Kirk1967 17 October 2013 09:41 PM

ive got them on mine so yer they do mate.

rsdub 17 October 2013 09:49 PM

the rl7s what et and stud pattern please

Boyakasha 18 October 2013 07:54 AM

Update for James, 5 x 100, not sure on ET.

Marc

RS2 JIM 18 October 2013 08:57 AM


Originally Posted by Kirk1967 (Post 11239047)
ive got them on mine so yer they do mate.

Thanks. Yes, they do clear the Brembo's albeit narrowly without spacers. I actually ran spacers anyway to give the car a better stance. They were either 5mm or 8mm hubcentric ones from Eibach. They've gone to someone else now though so if you want spacers you'll need to source yourself.


Originally Posted by rsdub (Post 11239058)
the rl7s what et and stud pattern please

As Marc said above they're for a classic so 5 x 100 but i'm not certain on ET myself. I'll pull one down from the rack tonight and check. I suspect ET32 as that rings a bell but could be utter nonsense!


Originally Posted by Boyakasha (Post 11239240)
Update for James, 5 x 100, not sure on ET.

Marc

Thanks Marc!

RS2 JIM 18 October 2013 12:17 PM

PRO RACE wheels sold.

Gambit 18 October 2013 12:31 PM

i loved my racelines on my old classic - lovely wheel, rare in subaru fitment & strong as hell wheel

http://i5.photobucket.com/albums/y18...t001/RL7-1.jpg
http://i5.photobucket.com/albums/y18...t001/RL7-2.jpg

pretty certain the et is something like et45 or et48, they sat just a tiny bit further out than the speedline st2's which where et53

RS2 JIM 18 October 2013 01:41 PM

Gambit,

Many thanks for that. Your car looked good on them!

I was clearly spouting nonsense on the offset! Will check this evening.

ATWRX 18 October 2013 02:10 PM

Have RL7 on my Blobeye, great wheels, wish these were 114.3 PCD I'd have had them off you. Can't remember offset of mine, pretty sure they're 45 or something, like said above, sit a little further out than standard wheels, so nice fit.

RS2 JIM 18 October 2013 02:22 PM

1 Attachment(s)
Pic of tpms screen for johnwiz.

johnwiz 18 October 2013 07:21 PM

Many thanks James, believe it or not I bought set of Rota GRAs 17s
yesterday as track wheels, & I have a set of 18s so I now have 2 sets of wheels /tyres
to sell :) cheers John

rsdub 20 October 2013 11:19 AM

any news on et for the racelines?

RS2 JIM 21 October 2013 12:17 AM

Sorry for delay. I couldn't see the markings on the wheels so spoke to the chap I bought them from and he advises they're an ET48.

Hope this helps.


All times are GMT +1. The time now is 11:07 PM.


© 2024 MH Sub I, LLC dba Internet Brands