***PICTURES NOW ADDED***

Hi guys. I have taken these wheels off the car in advance of my new, smaller wheels coming. Came with the car, not my style at all and planned to swap them before I bought it .

A set of gold Rota Grid Drifts in 18x9.5 ET35 PCD 5x100 wheels with Falken FK-452 rubber with lots of tread left, even on the wheels that had been cambered in! Pictures here - https://www.scoobynet.com/subaru-444...3-jdm-sti.html

Very good condition overall, a few bits that need touching up (not done by me) but bloody amazing considering how ridiculously far they stick out! £4 touchup paint available here - http://www.scoobyparts.com/acatalog/...UP_PAINT_.html

Pictures here:

http://www.ftaclan.net/clanftp/nick/...3/SAM_0164.JPG
http://www.ftaclan.net/clanftp/nick/...3/SAM_0165.JPG
http://www.ftaclan.net/clanftp/nick/...3/SAM_0166.JPG
http://www.ftaclan.net/clanftp/nick/...3/SAM_0167.JPG
http://www.ftaclan.net/clanftp/nick/...3/SAM_0168.JPG
http://www.ftaclan.net/clanftp/nick/...3/SAM_0169.JPG
http://www.ftaclan.net/clanftp/nick/...3/SAM_0170.JPG
http://www.ftaclan.net/clanftp/nick/...3/SAM_0171.JPG
http://www.ftaclan.net/clanftp/nick/...3/SAM_0172.JPG
http://www.ftaclan.net/clanftp/nick/...3/SAM_0173.JPG

For a Blobeye, if you are running even vaguely lower suspension, IMO you WILL need the arches rolled/flared possibly if that can be done much on these, no idea.

Hopefully pics 172 and 173 will show that from the camber settings that this car was running, the inner edges are more worn and the other pair of tyres but this one was running pretty heavy camber, lots of life left there.

I am based in Farnham, Surrey and would really, really prefer these to be collected.

Will get pictures up later after I have just quickly washed off the light brake dust on them from the sub-200 miles I have put on them since buying.

I don't think that £700 is unfair to ask for them. By £700 being what I am asking, that means that my lowest that I would take is £650 collected. No, not including delivery as I have various reasons currently for not shipping them. partly health-related, partly risk-related and partly time-related . - SOLD TO LOFTY35

Cheers,

Nick

 

Will they fit over brembos and will they fit on a car lowers on tein a techs ?

Chris

 

Dude, did you look at the photos in the first link? That is sitting low on coilovers. As for will they clear the Brembos, I don't know myself as AP 6-pots are in this one but I am pretty sure they do based on this picture - http://i5.photobucket.com/albums/y18...fingham009.jpg

This picture - http://i6.photobucket.com/albums/y21...o/DSC_0030.jpg

This picture - http://i38.photobucket.com/albums/e1...2/IMAG0296.jpg

 

I wasn't concerned about the tein being too low, I'm just wondering whether with the width and offset of these wheels they would need to be run with coilovers and camber , surely they'll rub my arches that's what I thinking ...

 

As mentioned in the ad, I would strongly advice at least rolled arches at the very least, don't think they will safely run on a Blob/hawk without that and possible camber but not an expert on these.

 

Sorry got giddy and didnt see that bit .. Cheers buddy

 

Just to help yes they'll clear brembos mate and would def need some arch work to fit your set up. Camber bolts would probably be advised if not running coilovers. Hope this helps you mate

Martin

 

Yeah great help thanks :-)

 

Pictures now up!

 

I have pm'ed not sure if its gone through. Email me please mate jamesprice8@hotmail.co.uk. Thanks, James

 

pm sent very interested in these.

 

Provisionally sold to Lofty35 thanks guys.

 

Hi,

Just wondered if these sold?

Cheers

Aidan

 

SOLD last weekend, thanks.