Rare Compomotive's White
#1
Rare Compomotive's White
A set of highly desirable Compomotive Alloy Wheels. Model: MO 1571. Rare 8" wide wheels.
They have a slight dish from the face of the wheel to the rim edge approx 1" deep.
5 x 112 stud layout, so will suit many of the VW / Audi group of cars ( including VW, Audi, Seat and Skoda ).
See list at bottom.
They are 15 inch by 8 inch wide and offset ET25.
Centre bore is 57.1mm for direct fit to VW / Audi group cars without the need of spigot rings.
Mercedes are also this size stud layout but have a larger hub bore but could be used with spacers.
They are all in excellent condition, 3 are mint, one had a slight scuff on the very edge but has been touched in so barely noticeable when on the car.
5×112 Cars.
Audi:
Quattro Coupe 1979 - 1994
A3 2003 on
A4 1994 on
A6 1994 on
Allroad 1995 on
200
5000 Turbo 1979 - 1990
Ford:
Galaxy 1995 - 2005
Mercedes:
All passenger cars, but Mercedes centre bore is bigger then these wheels, so wheel bolt holes will line up but wheels wont fit directly on to hubs and would need spacers.
Seat:
Alhambra 1996 on
Leon Mk2 2005 on
Skoda:
Octavia Mk2 2004 on
VW:
Golf Mk5 2003 on
Golf Mk6 2009 on
Jetta 2006 on
Caddy 2003 on
Passat 1997 on
Sharan 1996 on
Touran 2003 on
Caravelle
Transporter 1990 on
I bought these for my Audi quattro yet with the impreza gathering pace and in need of some good alloy's or tyres
Ill quite happily swap or part ex for the following as well
Brembo brakes,pads,discs,or a VGC engine ready to drop in (1995 wrx) , full exhaust system (blitz or hayward and scott system's cost similar to these !!.
Or ill swap/part ex for similar to these alloy's in 5.100 classic impreza fitment with tyre's.
Im ideally after something similar to these in design:
http://www.ebay.co.uk/itm/17-SUBARU-...item27bd35bfe0
Buy outright for £650 OVNO!!!
They have a slight dish from the face of the wheel to the rim edge approx 1" deep.
5 x 112 stud layout, so will suit many of the VW / Audi group of cars ( including VW, Audi, Seat and Skoda ).
See list at bottom.
They are 15 inch by 8 inch wide and offset ET25.
Centre bore is 57.1mm for direct fit to VW / Audi group cars without the need of spigot rings.
Mercedes are also this size stud layout but have a larger hub bore but could be used with spacers.
They are all in excellent condition, 3 are mint, one had a slight scuff on the very edge but has been touched in so barely noticeable when on the car.
5×112 Cars.
Audi:
Quattro Coupe 1979 - 1994
A3 2003 on
A4 1994 on
A6 1994 on
Allroad 1995 on
200
5000 Turbo 1979 - 1990
Ford:
Galaxy 1995 - 2005
Mercedes:
All passenger cars, but Mercedes centre bore is bigger then these wheels, so wheel bolt holes will line up but wheels wont fit directly on to hubs and would need spacers.
Seat:
Alhambra 1996 on
Leon Mk2 2005 on
Skoda:
Octavia Mk2 2004 on
VW:
Golf Mk5 2003 on
Golf Mk6 2009 on
Jetta 2006 on
Caddy 2003 on
Passat 1997 on
Sharan 1996 on
Touran 2003 on
Caravelle
Transporter 1990 on
I bought these for my Audi quattro yet with the impreza gathering pace and in need of some good alloy's or tyres
Ill quite happily swap or part ex for the following as well
Brembo brakes,pads,discs,or a VGC engine ready to drop in (1995 wrx) , full exhaust system (blitz or hayward and scott system's cost similar to these !!.
Or ill swap/part ex for similar to these alloy's in 5.100 classic impreza fitment with tyre's.
Im ideally after something similar to these in design:
http://www.ebay.co.uk/itm/17-SUBARU-...item27bd35bfe0
Buy outright for £650 OVNO!!!
Last edited by quattroowner; 14 October 2011 at 12:05 PM.
#4
ive got a set of these compomotive's in black 17's on a classic. not a mark on and of the wheels needs new tyres if interested http://s1004.photobucket.com/albums/...7082010629.jpg
#5
Hey mate
There similar design. but these one's are slightly differant. Im no longer needing alloy's as i managed to get 2 set's recently ( 1 set up for sale again due to change of circumstances)
£650 or full exhaust system and downpipe(plus cash my way) or a working engine or similar
There similar design. but these one's are slightly differant. Im no longer needing alloy's as i managed to get 2 set's recently ( 1 set up for sale again due to change of circumstances)
£650 or full exhaust system and downpipe(plus cash my way) or a working engine or similar
Trending Topics
#12
Now on Gaybay for all the gay's to look at: . . Any none gay's such as Snetter's,SS.Net,Aberdeenscobies
Will get them slightly cheaper at £550 buy it now. Happy bidding guy's
http://www.ebay.co.uk/itm/2709081554...ht_1038wt_1270
Will get them slightly cheaper at £550 buy it now. Happy bidding guy's
http://www.ebay.co.uk/itm/2709081554...ht_1038wt_1270
Thread
Thread Starter
Forum
Replies
Last Post