MY97/98 MAP sensor and ecu connectors
#2
Scooby Regular
Join Date: Jan 2001
Location: Down South to Ooop North to Back Down South again!!
Posts: 6,633
Likes: 0
Received 0 Likes
on
0 Posts
Tone - Have you got a MY93WRX? If you're trying to convert a later map sensor to fit your car to enable the running of higher boost then you might just be in luck
I've one from a MY00 that I converted to fit a MY95 so it should be the same as yours with the triangular fitment plug Did all my research as you can see from the pics, soldered the connectors and then filled it in with silicone sealant to stop any weather damage
I did test it before I had my mappable ecu and no error codes came up so I believe i've done my job properly Got an Apexi now with the AVC-R so it's not needed anymore The MAP sensor initially cost me £30 from Grade A and then I had to total an old MAP sensor of mine for the plug.
If you're interested then drop me a line. Or I may have got totally the wrong end of the stick LOL
MAFFA
I've one from a MY00 that I converted to fit a MY95 so it should be the same as yours with the triangular fitment plug Did all my research as you can see from the pics, soldered the connectors and then filled it in with silicone sealant to stop any weather damage
I did test it before I had my mappable ecu and no error codes came up so I believe i've done my job properly Got an Apexi now with the AVC-R so it's not needed anymore The MAP sensor initially cost me £30 from Grade A and then I had to total an old MAP sensor of mine for the plug.
If you're interested then drop me a line. Or I may have got totally the wrong end of the stick LOL
MAFFA
#4
Scooby Regular
Join Date: Jan 2001
Location: Down South to Ooop North to Back Down South again!!
Posts: 6,633
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tone Loc
Yep, wrong end of the stick
May still be interested tho... has the map sensor be 'opened' to do the mod or did you just solder onto the tabs. I.e could i get all the silicon out, desolder and use the OEM MY97-00 connector plug?
Tony.
May still be interested tho... has the map sensor be 'opened' to do the mod or did you just solder onto the tabs. I.e could i get all the silicon out, desolder and use the OEM MY97-00 connector plug?
Tony.
MAFFA
#6
Originally Posted by MAFFA
Forgot to say...BUGGER!!! That took me ages to type that lot as well LOL
MAFFA
MAFFA
Can you PM me what you'd want for it, or drop me an e-mail toe_scooby@hotmail.com
Cheers,
Tony.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM