Tmic bonnet shrouding
#1
Scooby Regular
Thread Starter
Join Date: Jun 2014
Location: IOW
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Tmic bonnet shrouding
I've got a type r impreza with a new age tmic.
After the I assume rubber shrouding that clips to the inside of the bonnet to force air through the cooler.
After the I assume rubber shrouding that clips to the inside of the bonnet to force air through the cooler.
#6
Scooby Regular
iTrader: (7)
Join Date: Aug 2002
Location: Lancashire & District Subaru
Posts: 2,989
Likes: 0
Received 0 Likes
on
0 Posts
Here we go - hope it makes sense.
Its 29" long by 10 3/4 " wide.
The hole is 5 1/2" by 16".
Length wise - On one side the hole is 8" from the edge - at the other side its 4" from the edge.
Width wise the hole is in the middle.
I measured it against my STI and the overall size is the same but the STI has a longer hole to accomodate the bigger I/C.
This one is from a 04 WRX.
Hope this helps
Chris
Its 29" long by 10 3/4 " wide.
The hole is 5 1/2" by 16".
Length wise - On one side the hole is 8" from the edge - at the other side its 4" from the edge.
Width wise the hole is in the middle.
I measured it against my STI and the overall size is the same but the STI has a longer hole to accomodate the bigger I/C.
This one is from a 04 WRX.
Hope this helps
Chris
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM