scoobyp1

iTrader: (4)

Since doing the engine and fitting the FMIC i am having trouble with the pipe popping off on boost


I've arrowed the pipe and where its blowing off. It doesn't matter how tight i do the clip, it just keeps popping. I am still getting quite a bit of moisture in the FMIC pipes even after fitting the catch can. The pic is an old one and i know its not plumbed in.


So any idea's lads ???

bluerigster

iTrader: (9)

Fit a longer silicon pipe so there is less force being subjected on the clip. It's posible the original one is too short so the pipe is pulling off.

Silver Scooby Sport

iTrader: (15)

You could always double clamp it as well then Tony.

cookstar

iTrader: (6)

Has the metal pipe got a barb on the end?

As above fit a longer piece of silicone and double clamp

scoobyp1

iTrader: (4)

Thanks lads

I've got a length of the hose so i'll cut some a bit longer tomorrow


The car is desperate for a remap and the new turbo - anyone know where i can get a simtek fitted ?

"Taylor"

iTrader: (2)

Defo double up the jubilee clips, this is what API did when they put mine back together.

DannyBoy007

iTrader: (7)

Funny your having this problem, I had an issue with one of mine only the other week, Three times it popped off in the space of 80 miles.

I ordered a longer silicon hose and changed the clamp to a Murray clamp as used on some WRC cars. I was very impressed with the design of the clamp and will be changing all of mine over to these in the near future. They say they will never blow off!!!!!

All ordered from SFS performance

SFS Performance - Silicone Hoses

"Taylor"

iTrader: (2)

Dannyboy your a legend! I've been looking for these for ages!