Exhaust Problem Solved
08 March 2007, 03:33 PM
#1
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Jan 2007
Location: Swansea South Wales, UK.
Posts: 692
Likes: 0
Received 0 Likes
on
0 Posts
Exhaust Problem Solved
This is my solution regarding the problem i listed in this thread,
https://www.scoobynet.com/wales-26/5...t-problem.html
The back box i bought is a few inches short to be able to reach the centre pipe.
My Back Box
Thanks to my old man we measured up and worked out the angles and he came up with this solution see the pics below.
Hasn't been welded up completly yet but you get the idea from this picture
From flange face to face the distance is 3 and 3 quarter inches
Bored out on this end at 3inches to match the size of the back box pipe
This end is only bored out to 2 and half inches to get a good seal with the centre section
I've also got a centre section off of ebay that will be going on today and hopefully shall have the back box and the make up section in place and shall get some photos uploaded to show you peeps how it all fits.
Melon.
https://www.scoobynet.com/wales-26/5...t-problem.html
The back box i bought is a few inches short to be able to reach the centre pipe.
My Back Box
Thanks to my old man we measured up and worked out the angles and he came up with this solution see the pics below.
Hasn't been welded up completly yet but you get the idea from this picture
From flange face to face the distance is 3 and 3 quarter inches
Bored out on this end at 3inches to match the size of the back box pipe
This end is only bored out to 2 and half inches to get a good seal with the centre section
I've also got a centre section off of ebay that will be going on today and hopefully shall have the back box and the make up section in place and shall get some photos uploaded to show you peeps how it all fits.
Melon.
08 March 2007, 11:06 PM
#3
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Jan 2007
Location: Swansea South Wales, UK.
Posts: 692
Likes: 0
Received 0 Likes
on
0 Posts
This is what the finished product looks and sounds like, not a bad job if i do say so myself.
Its sitting rather close to the bumper i need to alter one of the rubbers but you get the idea
Heres the makeup piece in place and all welded up and smoothed off, oh and theres the tail end of the centre de-cat pipe.
Heres a link to a short short vid of the car and what the exhaust sounds like
YouTube - Scooby New Exhaust
Enjoy, Melon
Its sitting rather close to the bumper i need to alter one of the rubbers but you get the idea
Heres the makeup piece in place and all welded up and smoothed off, oh and theres the tail end of the centre de-cat pipe.
Heres a link to a short short vid of the car and what the exhaust sounds like
YouTube - Scooby New Exhaust
Enjoy, Melon
08 March 2007, 11:16 PM
#5
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Jan 2007
Location: Swansea South Wales, UK.
Posts: 692
Likes: 0
Received 0 Likes
on
0 Posts
Hey cheers mate.
Oh and sorry to hear about your car mate im gutted for you, if there is anything i can do to help not that im that up on things give me a shout m8.
Melon.
Oh and sorry to hear about your car mate im gutted for you, if there is anything i can do to help not that im that up on things give me a shout m8.
Melon.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM