Enginetuner Engineering
12 December 2013, 03:48 PM
#1
Scooby Regular
Thread Starter
Join Date: Nov 2006
Location: Enginetuner.co.uk Plymouth Dyno Dynamics RR Engine machining and building EcuTek SimTek mapping
Posts: 3,662
Likes: 0
Received 0 Likes
on
0 Posts
Enginetuner Engineering
As it's Winter now, some of you will be on Winter projects! Or at least fixing that one you've broken..
We're here to help with virtually any kind of Engineering. We have a fully equipped machine shop and can tackle most engine prep tasks.
A few tasters;
Reboring and honing (We use stress plates)
Pressure testing
Block Decking and Head surfacing
Balancing
Re-guiding using the Cosibro thin wall inserts.
All manner of other engineering tasks such as rear thrust machining, 14mm stud conversions, drilling out broken bolts etc.
We can also arrange bolt plating
Plus of course, engine building work to our usual quality..
We will supply any engine parts required, including genuine Subaru gaskets and seals and all aftermarket goodies.
Technical back up is a given here, so don't be afraid to call me up and ask..
01752 345880 business hours, or PM any time.
We're here to help with virtually any kind of Engineering. We have a fully equipped machine shop and can tackle most engine prep tasks.
A few tasters;
Reboring and honing (We use stress plates)
Pressure testing
Block Decking and Head surfacing
Balancing
Re-guiding using the Cosibro thin wall inserts.
All manner of other engineering tasks such as rear thrust machining, 14mm stud conversions, drilling out broken bolts etc.
We can also arrange bolt plating
Plus of course, engine building work to our usual quality..
We will supply any engine parts required, including genuine Subaru gaskets and seals and all aftermarket goodies.
Technical back up is a given here, so don't be afraid to call me up and ask..
01752 345880 business hours, or PM any time.
13 December 2013, 05:08 PM
#3
Scooby Regular
Thread Starter
Join Date: Nov 2006
Location: Enginetuner.co.uk Plymouth Dyno Dynamics RR Engine machining and building EcuTek SimTek mapping
Posts: 3,662
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM