Alcon Prodrive Caliper Rebuild @ Scoobyworx
#1
Alcon Prodrive Caliper Rebuild @ Scoobyworx
We have recently been asked to refurbish a set of Alcon Calipers for a Scottish Scoobies forum member and we are going to do a thread on them.
They are in a sorry state with heavy corrosion but they will be spot on when finished but plenty of work required to save them from the scrap pile if we are honest but once complete will be a great set of calipers.
Here is a before picture, we had stripped one caliper down hence not quite been a before picture but i forgot to take one before we started. Il strip the other caliper today and add some more pictures showing the extent of the corrosion etc later.
They are in a sorry state with heavy corrosion but they will be spot on when finished but plenty of work required to save them from the scrap pile if we are honest but once complete will be a great set of calipers.
Here is a before picture, we had stripped one caliper down hence not quite been a before picture but i forgot to take one before we started. Il strip the other caliper today and add some more pictures showing the extent of the corrosion etc later.
#2
Here is a before and after of what type of repairs we have had to do on these, ive just finished one front for now to see how the whole process went, all of them have corrosion al the way through to the threads on the bit where the pad guides sit and we have had to rebuild them with special metal filler we use for powder coating.
#6
Parts for the Alcons are £215 including the bridge pipes, seal kit etc, labour would be dependant upon condition after blasting. Also on any re threads required also.
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM