BC Coil overs Top mounts
#1
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Jan 2011
Location: southend
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
BC Coil overs Top mounts
Hello guys got a 2002 sti with full BC Coil overs Soft to hard and camber adjustable
Only had the car around 1-2 months member on here owned it.
The guy said the top mounts on the fronts slightly click on certain bumps
They do but i think they have got worse since my hard driving
The noise is mostly a click over a bumpy road but can sometimes be a slight clock round corners when you go to accelerate at slow speeds
Will also get the same noise when pulling away
I want to get this sorted any ideas?
Thanks
Only had the car around 1-2 months member on here owned it.
The guy said the top mounts on the fronts slightly click on certain bumps
They do but i think they have got worse since my hard driving
The noise is mostly a click over a bumpy road but can sometimes be a slight clock round corners when you go to accelerate at slow speeds
Will also get the same noise when pulling away
I want to get this sorted any ideas?
Thanks
#2
Scooby Regular
iTrader: (59)
Jack the car up at the front and remove the front wheels. Then from inside he wheel well grab the strut as near the top as possible and see if there is any movement in the top mount bearing if there is give Bren a phone and see if the bearing housing complete with bearing can be changed on its own.
While your there check the strut to hub connections are tight and the centre not holding the top mounts onto the strut are tight.
While your there check the strut to hub connections are tight and the centre not holding the top mounts onto the strut are tight.
Thread
Thread Starter
Forum
Replies
Last Post
supshon
General Technical
2
03 October 2015 08:06 PM