bc coilovers!!!! track help
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Feb 2010
Location: Bracknell / berkshire
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
bc coilovers!!!! track help
i have a track day saturday just fitted bc coilovers last weekend!! just wondering if anyone knows the best set up i.e stiffness and ride hight!!!! im running the br type with whiteline arb on stiff 225 40 18 potenzas o5o any help would be appreciated
stuart
stuart
#4
Scooby Regular
iTrader: (5)
Join Date: Feb 2009
Location: Chelmsford, Essex
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Ok, this might not help you much as mine is an MY05 WRX so it'll probably be a bit lighter on the front end than your, plus I've got a standard ARB but I do have 18"s on it.
For stiffness I'm running 13 on the fronts, and 7 on the rear. I'll have to post the ride height tomorrow when I can take the measurement as I've forgotten then.
I found that reducing the dampers on the rears helped it turn in much better.
Oh year, my geometry settings are the Prodrive recommended settings.
For stiffness I'm running 13 on the fronts, and 7 on the rear. I'll have to post the ride height tomorrow when I can take the measurement as I've forgotten then.
I found that reducing the dampers on the rears helped it turn in much better.
Oh year, my geometry settings are the Prodrive recommended settings.
Last edited by Scoober-Dubs; 09 September 2011 at 02:47 PM. Reason: Geo
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM