Classic suspension and steering geometry.
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Nov 2005
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
Classic suspension and steering geometry.
I've been trawling the forum for information on the set up of a Turbo 2000 MY00.
As the car is completely standard in the suspension department and the only difference is the fitting of 17" wheels with 215/40x17 tyres.
I was going to try the Prodrive settings as a starting point but some of the information is unclear.
Front Camber is set at -1.5degrees this is straight forward enough.
Front Toe in between 0.02 and 0.1 degrees (0.06 being the ideal) or in other places 1mm toe in. What it doesn't say is this per side or total.
Thanks in advance for clearing this up.
As the car is completely standard in the suspension department and the only difference is the fitting of 17" wheels with 215/40x17 tyres.
I was going to try the Prodrive settings as a starting point but some of the information is unclear.
Front Camber is set at -1.5degrees this is straight forward enough.
Front Toe in between 0.02 and 0.1 degrees (0.06 being the ideal) or in other places 1mm toe in. What it doesn't say is this per side or total.
Thanks in advance for clearing this up.
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM