blueoxo22

Hi,

Just got hold of a set of HKS RS coilovers for my Bugeye in pretty good condition but.....

I need the adjustment C spanner, anyone any idea on the size needed as the HKS web support is pretty naf. (or got one for sale)

Also I wanted to get hold of the instructions to ensure I install at factory settings to begin with, anybody have a scanned set or know the factory settings? I found this guide for the Supra http://www.supraforums.com.au/forum/...ad.php?t=52957 but not sure if the stock setup will be the same. The stiffness adjustment seems pretty straight forward, turn clockwise till it stops then back 30 clicks for the softest setting, Camber on the top I will leave at 0, but it's the spring height I haven't got a clue about and don't want to trust what they are at now.

Once installed as factory setup I then wanted to get a proper geometry setup done, anyone know of a garage in Beds, Hert or Bucks that could do this (Herts is closest)?

Thanks,

Blueoxo22

blueoxo22

Just an update..

First these were not Hipermax III but the II as I found out.

Also to say that I managed to get the user guide for them so if anyone ever needs a set just pm me and I'll send.

Default ride height F&R is 59mm from bottom spring to the base of the thread.
Default stiffness is 20 clicks back from full clockwise till stop.

Don't ever go beyond 30 clicks anticlockwise.

Mr2na86

Hi I'm wondering if u still have the owners manual for HKS Hipermax II RS Coilover, I going to purchase a use one with out a manual, just want to know if u still have a copy that u can send me.

Thanks
Ed