advice please on front camber
#1
advice please on front camber
Hi every one.
I have a 06-07 sti and i am trying to get a nice geo set up. The problem is i can only get -0.89 degrees out of the drivers side front, on the front passenger side i can get -1.17 degrees.
The car has Tien S Teck springs, camber bolts on max negative and a far bit of heevhoo on the hubs pushing the back as far as they go then retightened.
Ideally i believe -1.5 degrees is the target with 0.06 toe.
Can any of you please give me some advice how to get this.
thanks
I have a 06-07 sti and i am trying to get a nice geo set up. The problem is i can only get -0.89 degrees out of the drivers side front, on the front passenger side i can get -1.17 degrees.
The car has Tien S Teck springs, camber bolts on max negative and a far bit of heevhoo on the hubs pushing the back as far as they go then retightened.
Ideally i believe -1.5 degrees is the target with 0.06 toe.
Can any of you please give me some advice how to get this.
thanks
#2
Scooby Senior
iTrader: (3)
Join Date: Jun 2006
Location: Slowly rebuilding the kit of bits into a car...
Posts: 14,333
Likes: 0
Received 0 Likes
on
0 Posts
Two more camber bolts to push the hub further still !
I.E. one pair in the top, and another pair in the bottom.
Not sure it will work, but £25 a pair @ Camskill !
HTH
dunx
P.S. I'm at 1.75 degrees, but cheated with Teins....
I.E. one pair in the top, and another pair in the bottom.
Not sure it will work, but £25 a pair @ Camskill !
HTH
dunx
P.S. I'm at 1.75 degrees, but cheated with Teins....
#3
I have tien s-tech springs but cant get that,. Can you replace the lower bolts with camber bolts?????????????
Im thinking of elongating the top holes on the stuts, has any one done this???????????
thanx
Im thinking of elongating the top holes on the stuts, has any one done this???????????
thanx
#6
Scooby Senior
iTrader: (51)
Join Date: Nov 2005
Location: Wherever I park my car, that's my home
Posts: 20,491
Likes: 0
Received 2 Likes
on
2 Posts
Yes you can fit camber bolts top and bottom, or alternatively fit adjustable top mounts. A lot more pricey but can dial in some static castor too
As with Dunx, I'm setting the front to 1.75 degrees when it gets set up on Tuesday. The lowering springs do help to add some additional camber anyway.
As with Dunx, I'm setting the front to 1.75 degrees when it gets set up on Tuesday. The lowering springs do help to add some additional camber anyway.
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM
Sub-Subaru
General Technical
1
28 September 2015 12:47 PM
hedgecutter
General Technical
3
25 September 2015 02:35 PM