Front droplinks
#1
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Sep 2006
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Front droplinks
I have got a set of Rose jointed front drop links to go onto my alloy front wishbones. (MY00 UK Classic) part number k*c39 i think.
In the pack it shows the fitting instructions with 4x 9mm spacers.
Has anyone fitted these? did they fit the spacers? I think they are the Whiteline replacements for STI's with the alloy wishbones.
Problem is there are no 9mm spacers in the pack. If I do need them, can I make them up in aluminium or is that too soft to use?
Thanks
In the pack it shows the fitting instructions with 4x 9mm spacers.
Has anyone fitted these? did they fit the spacers? I think they are the Whiteline replacements for STI's with the alloy wishbones.
Problem is there are no 9mm spacers in the pack. If I do need them, can I make them up in aluminium or is that too soft to use?
Thanks
#2
Scooby Regular
iTrader: (10)
Join Date: Jan 2007
Location: www.somersetscoobys.co.uk
Posts: 736
Received 0 Likes
on
0 Posts
just fitted these to mine and you will need the spacers but i wouldnt use ally ones as they could deform under the load. any decent motor factors will have the steel ones. hope this helps
#3
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Sep 2006
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Spot on, thanks.
My mate owns an engineering works so it'll give the apprentice something to do.
Has anyone got a kit that they haven't fitted yet?
Maybe they could check the dimensions please?..............Not the 9mm part, I have that one
My mate owns an engineering works so it'll give the apprentice something to do.
Has anyone got a kit that they haven't fitted yet?
Maybe they could check the dimensions please?..............Not the 9mm part, I have that one
#6
In all the 3 pics the roll bars are Whiteline bars. The black one is a 22mm and the silver a 27mm. In both cases the overall width are much the same.
The spacer layout is to get the links as vertical as possible when the car is at ride height.
Even installed as you see them, the links are tilted over at an almost alarming angle, but I've never had any probs with them.
I have a good soaking of silicon spray grease behind the yellow seals.
Graham.
The spacer layout is to get the links as vertical as possible when the car is at ride height.
Even installed as you see them, the links are tilted over at an almost alarming angle, but I've never had any probs with them.
I have a good soaking of silicon spray grease behind the yellow seals.
Graham.
Trending Topics
#8
Scooby Senior
iTrader: (51)
Join Date: Nov 2005
Location: Wherever I park my car, that's my home
Posts: 20,491
Likes: 0
Received 2 Likes
on
2 Posts
Oh dear, more money
#9
#10
Scooby Senior
iTrader: (51)
Join Date: Nov 2005
Location: Wherever I park my car, that's my home
Posts: 20,491
Likes: 0
Received 2 Likes
on
2 Posts
#13
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Sep 2006
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Right this weekend is fitting time.
I have:
One pair of Alloy wishbones (I have replacement castor blocks but no way to link them )
One pair of Rose jointed drop links. (Including spacers)
Newly painted Struts with shocks and springs (OE UK ones)
My shopping list is:
New lower wishbone front bush
Steering rack bushes
Front ARB bushes (Unsure of the standard UK ARD dia. 19mm maybe?)
Whatever the part is called that uses the two bolts at the back of the alloy wishbones that goes through the castor blocks????
Questions
1. What is the link piece called that goes from the wishbone to the castor block or will there be one on my steel wishbones that can be used?
2. What other things should be changed at the same time?..................... Track rod ends?..........Bottom balljoints?
3. Are the UK2000 Bottom ball joints the same for Alloy wishbones?
Your help would be appreciated.
Thanks
I have:
One pair of Alloy wishbones (I have replacement castor blocks but no way to link them )
One pair of Rose jointed drop links. (Including spacers)
Newly painted Struts with shocks and springs (OE UK ones)
My shopping list is:
New lower wishbone front bush
Steering rack bushes
Front ARB bushes (Unsure of the standard UK ARD dia. 19mm maybe?)
Whatever the part is called that uses the two bolts at the back of the alloy wishbones that goes through the castor blocks????
Questions
1. What is the link piece called that goes from the wishbone to the castor block or will there be one on my steel wishbones that can be used?
2. What other things should be changed at the same time?..................... Track rod ends?..........Bottom balljoints?
3. Are the UK2000 Bottom ball joints the same for Alloy wishbones?
Your help would be appreciated.
Thanks
#14
Scooby Senior
iTrader: (51)
Join Date: Nov 2005
Location: Wherever I park my car, that's my home
Posts: 20,491
Likes: 0
Received 2 Likes
on
2 Posts
Whatever the part is called that uses the two bolts at the back of the alloy wishbones that goes through the castor blocks????
Questions
1. What is the link piece called that goes from the wishbone to the castor block or will there be one on my steel wishbones that can be used?
Your help would be appreciated.
Thanks
Questions
1. What is the link piece called that goes from the wishbone to the castor block or will there be one on my steel wishbones that can be used?
Your help would be appreciated.
Thanks
#15
Scooby Senior
iTrader: (51)
Join Date: Nov 2005
Location: Wherever I park my car, that's my home
Posts: 20,491
Likes: 0
Received 2 Likes
on
2 Posts
COuldn't find my parts catalogue last night. I can only assume the wife has packed it as we start moving house today. If I find it when we get to the other end I'll get you some details.
#18
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Sep 2006
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Spacers
The pack states that the spacers are included, but mine weren't in the pack.
I'm going to get some made up so I'll double the order up for you Stalked in case they are not with yours.
I'm going to get some made up so I'll double the order up for you Stalked in case they are not with yours.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM