Help - Hardrace front droplink installation
#1
Scooby Senior
Thread Starter
iTrader: (51)
Join Date: Nov 2005
Location: Wherever I park my car, that's my home
Posts: 20,491
Likes: 0
Received 2 Likes
on
2 Posts
Help - Hardrace front droplink installation
Fitted my new eibach ARBs anf hardrace droplinks tonight, well almost
Rears have gone on a treat, however I'm having problems with the fronts, subframe came off, old ARB came off and new one went on but the droplinks are different.
The old ones are the rose jointed type but are seized on solid so cannot be re-used. The hardrace ones need bolts, but these are not included . Anyone know what size bolts I need?
Or should I just buy new rose jointed ones
Rears have gone on a treat, however I'm having problems with the fronts, subframe came off, old ARB came off and new one went on but the droplinks are different.
The old ones are the rose jointed type but are seized on solid so cannot be re-used. The hardrace ones need bolts, but these are not included . Anyone know what size bolts I need?
Or should I just buy new rose jointed ones
#2
Think you will find them to be M8 bolts, about 40mm long. Use locking 'Nyloc' nuts not plain nuts on the job.
Halfords sell what you need.
The Sti front links should be steel so work great on the front.
Halfords sell what you need.
The Sti front links should be steel so work great on the front.
#3
Scooby Senior
Thread Starter
iTrader: (51)
Join Date: Nov 2005
Location: Wherever I park my car, that's my home
Posts: 20,491
Likes: 0
Received 2 Likes
on
2 Posts
The holes are different at each end on the hardrace links. Suppose I should get off my backside and measure the diameter. Nuts aren't a problem, I've got loads, nyloc and plain
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM