4 Wheel alignment in Hampshire
#1
Had my tracking done at Powerstation last time (when I had the bump steer mod done).
Since then I've fitted Eibachs and was advised to give them a few weeks to bed in before I get the tracking re-done. Thing is who knows a decent 4 wheel alignment place in Hants (Portsmouth) ? (not michel dever - they are fully booked)
Also do I just get the normal manufacturers settings put on with the bump steer mod ? or is it something different ?
Gary
Since then I've fitted Eibachs and was advised to give them a few weeks to bed in before I get the tracking re-done. Thing is who knows a decent 4 wheel alignment place in Hants (Portsmouth) ? (not michel dever - they are fully booked)
Also do I just get the normal manufacturers settings put on with the bump steer mod ? or is it something different ?
Gary
#2
Scooby Regular
iTrader: (3)
Join Date: Dec 1999
Location: UK
Posts: 13,274
Likes: 0
Received 0 Likes
on
0 Posts
If you are willing to travel a bit, give Mill Lane Engineering a call in Basingstoke.
They are a Subaru dealer so import owners may be out of luck!
Give Charles Figgins a call on 01256-780790
Hope this helps
Andy
They are a Subaru dealer so import owners may be out of luck!
Give Charles Figgins a call on 01256-780790
Hope this helps
Andy
#3
Hmm quite a drive.
Are you sure it's 'proper' 4 wheel (not 2) alignment stuff ? (can't remember the make that Powerstation use - Sun ?)
It's just a could get a track done anywhere, but I wan't a proper accurate alignment check - all alignments are not equal
Gary
Are you sure it's 'proper' 4 wheel (not 2) alignment stuff ? (can't remember the make that Powerstation use - Sun ?)
It's just a could get a track done anywhere, but I wan't a proper accurate alignment check - all alignments are not equal
Gary
#6
Gary,
Have to agree with Andy, Mill Lane are excellent......they have a "proper" full four wheel alignment set up. you will get a before and after printout in the form of a chart, thrust angle, castor, KPI, toe & camber, i think that is about it!!
They are aware of a number of different "setups" including their own, so should be able to put on Power Stations setup if you have the settings.
When i left the forecourt i thought they had put my plate on another car the difference was amazing!!!!!
i think the cost is about £50 and they offer superb coffee for free too........
No links or buisiness interest just that they are good,
Charles is a top guy too.
Mark
[This message has been edited by DIGGY (edited 26 February 2001).]
Have to agree with Andy, Mill Lane are excellent......they have a "proper" full four wheel alignment set up. you will get a before and after printout in the form of a chart, thrust angle, castor, KPI, toe & camber, i think that is about it!!
They are aware of a number of different "setups" including their own, so should be able to put on Power Stations setup if you have the settings.
When i left the forecourt i thought they had put my plate on another car the difference was amazing!!!!!
i think the cost is about £50 and they offer superb coffee for free too........
No links or buisiness interest just that they are good,
Charles is a top guy too.
Mark
[This message has been edited by DIGGY (edited 26 February 2001).]
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM