Prodrive Springs on 02 STi
#1
I just fitted Prodrive Springs on my 02 STi and surprise, before measured 40.2mm and 39.5mm from centre of wheel to bottom edge of front guard and after measured 38mm and 37.5mm. Aprox 2cm lower. Rear before measured 37.6mm and 37.5mm and after measured 38mm and 38.5, for a increase of aprox 1cm and 1/2 cm. Anyone experience this?
Thanks in advance
Ken
Thanks in advance
Ken
#4
Scooby Regular
iTrader: (5)
Ken
I've just finished fitting the Prodrive spring kit to my 03 STi but won't be able to drive it for a day or so. At the moment at least the front is lower but the rear seems no different to before, maybe even a tad higher! but this is just as it has come off the jack. I'll post my findings around mid-week after driving it.
JohnD
I've just finished fitting the Prodrive spring kit to my 03 STi but won't be able to drive it for a day or so. At the moment at least the front is lower but the rear seems no different to before, maybe even a tad higher! but this is just as it has come off the jack. I'll post my findings around mid-week after driving it.
JohnD
#5
Thanks for that information John. Mine was noticably lower after fitting the front Prodrives, but i'm still hoping the rears might settle a tad more. It will be interesting to know your fingings John.
Thanks
Ken
Thanks
Ken
Thread
Thread Starter
Forum
Replies
Last Post
ATWRX
Full Cars Breaking For Spares
88
01 February 2016 07:28 PM