jaygsi

iTrader: (46)

So rear LH strut has gone, so going to replace the whole unit, Bought a new KYB strut, been on parts catalogue and saying spring is 20380FE560 but can't find one on ebay, its 2002 Bugeye 2.0 NA.

Also need

HELPER-R D22 20371FE110

DUST COVER-R 20372AA001

RUBBER SEAT LWR 20375FC001

RUBBER SEAT (UPR) 20375AC030 ​​​​​​​

​​​​​​​Can i just buy a complete kit?

jaygsi

iTrader: (46)

opessedforces shows this

jaygsi

iTrader: (46)

@2pots

2pot

iTrader: (3)

Dust boots and bump stops, both sides, bugeye only.
Optimal AK-735142

https://www.spring-loaded.co.uk/prod...E-%7EAK-735142
Written description is incorrect - with regard to fitment and year.

Lower rear isolator:
https://www.importcarparts.co.uk/par...y=&searchPart=
Picture is incorrect.

jaygsi

iTrader: (46)

Ok cheers 2pots although IPC one says turbo models only, its a GX Saloon.

Will get Don involved aswell.

@@Don Clark

Don Clark

You will only find springs equivalent to the MY01 - 20380FE570 version on ebay
As 2 pot posted various bumpstop/dust cover sets are listed, just search on 20371FE110
20375FC001- used on many models (inc turbo) as below _
http://opposedforces.com/parts/info/20375FC001/
20375AC030 ​​​​​​​- Dealer, US, Japan, Partsouq etc.

2pot

iTrader: (3)

The kyb 910046 rear dust boot and bump stops is incorrect for a bugeye.

https://www.buycarparts.co.uk/kyb/82...SABEgIR_PD_BwE

I'd be a bit dubious about changing springs/struts in singles.

https://www.ebay.co.uk/itm/2x-Kayaba...oAAOSwhBVdMBI-

Is 20380FE570 a wagon rear spring?
and
20380FE560 is the saloon rear spring?

jaygsi

iTrader: (46)

Got KYB rear shock for Saloon. Just thought I'd replace the whole the unit.

Don Clark

You tell me?? would appear to be left and right handed springs for Saloon ??

Don Clark

https://www.pedders.co.uk/subaru-imp..._p32079901.htm

jaygsi

iTrader: (46)

Really, looked like both same part number when I looked. I know the struts are handed.

So looking at that full setup a WRX rear set would be the same fitment?

jaygsi

iTrader: (46)

I've done it before, never felt bad in anyway. Remember buying my first impreza and when it went for mot, the guy said there was a clamp, clamping the rear spring together, as had gone into 2 halves, this was a 1998 non turbo, bought a shock off a turbo model and fitted it, felt fine.

jaygsi

iTrader: (46)

I might go for this, looks alot less hassle, and looks like it includes top mounts?