Coilover fitment
07 January 2018, 11:44 AM
#1
Scooby Regular
Thread Starter
Coilover fitment
Could anyone tell me if a set of coilovers from a 04 wrx would fit an 04 sti, these are kw v1's. The only difference I can see is the max front axle load is higher on their sti setup but most other setups use the same for both wrx and sti. Cheers.
08 January 2018, 09:18 AM
#2
as long as both cars are 5x100 PCD then no issue........
just be careful that the STi isn't a "widterack" 05MY car as these were available and registered in later 2004 so often people get mixed up
the later 05> STi uses 5x114.3PCD and the eralier design struts will not work
just be careful that the STi isn't a "widterack" 05MY car as these were available and registered in later 2004 so often people get mixed up
the later 05> STi uses 5x114.3PCD and the eralier design struts will not work
08 January 2018, 09:29 AM
#3
Scooby Regular
Thread Starter
as long as both cars are 5x100 PCD then no issue........
just be careful that the STi isn't a "widterack" 05MY car as these were available and registered in later 2004 so often people get mixed up
the later 05> STi uses 5x114.3PCD and the eralier design struts will not work
just be careful that the STi isn't a "widterack" 05MY car as these were available and registered in later 2004 so often people get mixed up
the later 05> STi uses 5x114.3PCD and the eralier design struts will not work
Thread
Thread Starter
Forum
Replies
Last Post
scottydouk
Suspension
1
27 August 2009 10:22 AM