Wheel rubbing help..
#1
Scooby Regular
Thread Starter
Join Date: Nov 2015
Location: Walsall
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
Wheel rubbing help..
Hi guys,
After some advice please I recently fitted some eibach springs to my blob eye wrx on the standard shocks and some 18" wheels, when I have two people in the back or take a left corner hard the rear drivers side wheel rubs, now this never happens to the passenger side.
I measured the distance between the middle of the wheel and the bottom of the arch and the drivers side rear is sitting 5mm lower is there any reason for this and is there anything I can do to sort it?
I got the eibach pro kit as I thought was the best option but I'm thinking of putting standard ones back on if can't sort this problem.
Many thanks
Chris
After some advice please I recently fitted some eibach springs to my blob eye wrx on the standard shocks and some 18" wheels, when I have two people in the back or take a left corner hard the rear drivers side wheel rubs, now this never happens to the passenger side.
I measured the distance between the middle of the wheel and the bottom of the arch and the drivers side rear is sitting 5mm lower is there any reason for this and is there anything I can do to sort it?
I got the eibach pro kit as I thought was the best option but I'm thinking of putting standard ones back on if can't sort this problem.
Many thanks
Chris
#3
Scooby Regular
Thread Starter
Join Date: Nov 2015
Location: Walsall
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
Tyre size is 225-40-18 not sure on et, 18" like I say though only rubbing on one side.
Car has done 80k miles so I would have thought original shocks.
Just strange that the drivers rear is 50mm lower than passenger rear?
Car has done 80k miles so I would have thought original shocks.
Just strange that the drivers rear is 50mm lower than passenger rear?
#6
Scooby Regular
iTrader: (3)
If you've got standard struts - the bump stop is under the dust boot:
http://www.ebay.co.uk/itm/KYB-Rear-D...MAAOSwiCRUla89
If your struts are inverted? Then the bump stop is inside the strut, and the above link is not suitable.
http://www.ebay.co.uk/itm/KYB-Rear-D...MAAOSwiCRUla89
If your struts are inverted? Then the bump stop is inside the strut, and the above link is not suitable.
#7
Scooby Regular
Thread Starter
Join Date: Nov 2015
Location: Walsall
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
If you've got standard struts - the bump stop is under the dust boot:
http://www.ebay.co.uk/itm/KYB-Rear-D...MAAOSwiCRUla89
If your struts are inverted? Then the bump stop is inside the strut, and the above link is not suitable.
http://www.ebay.co.uk/itm/KYB-Rear-D...MAAOSwiCRUla89
If your struts are inverted? Then the bump stop is inside the strut, and the above link is not suitable.
It's a standard wrx mate. So you think should be the ones in link?
Thread
Thread Starter
Forum
Replies
Last Post