Classic parts clearout (mostly MY99-MY00)
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: May 2008
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
Classic parts clearout (mostly MY99-MY00)
Looking to sell the scoob shortly, so all the parts I accumulated over the years and kept as spares need to go.
Pipercross Induction kit PK085. £40 delivered. (Like http://www.ebay.co.uk/itm/Subaru-Imp...item56482d1435, but only cone and single bracket to stop vibration damaging the MAF was on car when I got it, but looked very new.
MY99 MAF sensor - £40 delivered (notorious for going, this I bought to diagnose a problem which actually turned out to be a failing fuel pump, therefore is a few years old but not seen much use)
Original orange indicators + side repeaters £15 delivered
MY99 intercooler Y-pipe minus jubilee clips £12 delivered
AE800 ECU £40 (Best non-remapped ECU for MY00 bar PPP)
AE802 ECU £25 (Cheap and best for remapping)
Front ABS sensor from MY99 hub £20 (These are over £50 new for non genuine part!)
Will have some more parts ready shortly. Will post photos of any parts people are interested in.
Thanks
Matt
Pipercross Induction kit PK085. £40 delivered. (Like http://www.ebay.co.uk/itm/Subaru-Imp...item56482d1435, but only cone and single bracket to stop vibration damaging the MAF was on car when I got it, but looked very new.
MY99 MAF sensor - £40 delivered (notorious for going, this I bought to diagnose a problem which actually turned out to be a failing fuel pump, therefore is a few years old but not seen much use)
Original orange indicators + side repeaters £15 delivered
MY99 intercooler Y-pipe minus jubilee clips £12 delivered
AE800 ECU £40 (Best non-remapped ECU for MY00 bar PPP)
AE802 ECU £25 (Cheap and best for remapping)
Front ABS sensor from MY99 hub £20 (These are over £50 new for non genuine part!)
Will have some more parts ready shortly. Will post photos of any parts people are interested in.
Thanks
Matt
Last edited by tjmatt; 13 January 2014 at 07:20 PM. Reason: Added ABS sensor
#3
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: May 2008
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
Hi Steve,
Sorry my next car purchase has fallen through so I'll be looking to keep the bar on the car until it's time to go.
I will let you know if/when this is incase you are still looking.
All other parts still available and prices negotiable.
Matt
Sorry my next car purchase has fallen through so I'll be looking to keep the bar on the car until it's time to go.
I will let you know if/when this is incase you are still looking.
All other parts still available and prices negotiable.
Matt
#5
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: May 2008
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
I don't I'm afraid but it just mounts straight onto the end of the MAF tube using the 4 bolts that the existing airbox uses. There is then a bracket which is just connected via one of the bolt holes and bolts to the car to try and dampen vibration of the MAF.
I can get a picture of the parts no problem but weather is not good enough to spend time out trying to show it on the car.
I can get a picture of the parts no problem but weather is not good enough to spend time out trying to show it on the car.
Trending Topics
#8
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: May 2008
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
I'm sorry it was a good few years ago, maybe 4 so I can't remember. All I can say is it is a green stripe (the best version), drives the same as the one in the car, and gives 1.04V engine not running on the SSM diagnostics- which is a good MAF according to mappers.
Standard Black plastic pipe. Like http://www.ebay.co.uk/itm/97-00-SUBA...item4617c930ba but without the metal ends or jubilees.
Last edited by tjmatt; 16 January 2014 at 12:50 PM.
Thread
Thread Starter
Forum
Replies
Last Post
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM
JonMc
Non Car Related Items For sale
0
12 September 2015 09:33 AM