Breaking classic race car lots of good parts
#1
Breaking classic race car lots of good parts
Bought this from a guy on here but silly me when I got it I found that its the same as the one I already have. This is a Q45 Maf which most tuners will tell you is a great upgrade especially for the late spec MY99/00 classics which are renowned for fragile mafs which when fail make the car run lean and can cause engine to go bye,bye.
This maf has a 90mm housing which is same diameter as the MY99/00 so I believe a direct fit. This is complimented with an induction kit if you chasing power.
The Q45 can take big power yet strong and reliable and lends itself nicely to anyone with an Apexi Power FC.
Looking for £90 delivered for the MAF
This maf has a 90mm housing which is same diameter as the MY99/00 so I believe a direct fit. This is complimented with an induction kit if you chasing power.
The Q45 can take big power yet strong and reliable and lends itself nicely to anyone with an Apexi Power FC.
Looking for £90 delivered for the MAF
#5
STI V4 heads polished ported and knife edged
As above in excellent condition no longer needed as going AVEC these haven't been use they was brought a couple of years ago and have been on my shelf in my garage very safely stored these come with full set of cams spring valves all you need to put them together collection only so you can inspect them im in Enfield I payed £500 so thats the price might take a close offer?
I also have a set of used one piece suppertec valves they have been used but very low mileage these are over £300 new so £150
I also have a set of used one piece suppertec valves they have been used but very low mileage these are over £300 new so £150
Last edited by johnnybon; 20 February 2013 at 10:09 PM.
Trending Topics
#12
So your finally admitting they are 92.5? Told me they were unplayed with & standard shame I had to go to PayPal for my money back when you tried to rip me off for £400!
Last edited by Scooby Wagon; 08 March 2013 at 07:48 AM.
#13
THESE HAVE BEEN MEASURED BUY A VERY WELL RECOGNISED BUILDER ON HERE HE NOS WHO HE IS AND THEY ARE 92.225 BUT IM SELLING THEM AT 92.5 TO MAKE THEM LOOK WORSE THAN THEY ARE SO NO MORE MISUNDERSTANDING I HOPE THAT ANY POTENTIAL BUYER WILL UNDERSTAND WHAT IM DOING.
Now for my last word you can talk to and see that I have sold a lot of parts on here and never once had a compliant my part are as described and in good condition and at a fair price it's only now advertised at this price because of what I got from you so thanks to you someone going to get a bargain so please now go away and leave me alone HAVE A VERY NICE LIFE
To any potential buyer I'm sorry for this but with any form there always someone that will ruin it for others. Just a word of warning to they genuine people on our site don't deal with this guy he is a night mare
#14
Measurement here, done professionally not with sticks or a tape measure etc
http://img.photobucket.com/albums/v6...2BAA4FCCC0.jpg
Was told "standard & unplayed with" I'll let you all make up your minds on the above, when I complained communications stopped, at least Paypal saw through the deception
This has caused me enough stress without a keyboard war on here but I really don't take kindly to someone trying to rip me off for £400, end of story from me, you all have the facts
http://img.photobucket.com/albums/v6...2BAA4FCCC0.jpg
Was told "standard & unplayed with" I'll let you all make up your minds on the above, when I complained communications stopped, at least Paypal saw through the deception
This has caused me enough stress without a keyboard war on here but I really don't take kindly to someone trying to rip me off for £400, end of story from me, you all have the facts
#15
Measurement here, done professionally not with sticks or a tape measure etc
http://img.photobucket.com/albums/v6...2BAA4FCCC0.jpg
Was told "standard & unplayed with" I'll let you all make up your minds on the above, when I complained communications stopped, at least Paypal saw through the deception
This has caused me enough stress without a keyboard war on here but I really don't take kindly to someone trying to rip me off for £400, end of story from me, you all have the facts
http://img.photobucket.com/albums/v6...2BAA4FCCC0.jpg
Was told "standard & unplayed with" I'll let you all make up your minds on the above, when I complained communications stopped, at least Paypal saw through the deception
This has caused me enough stress without a keyboard war on here but I really don't take kindly to someone trying to rip me off for £400, end of story from me, you all have the facts
1\ that could be a picture of any block ?
2\ you don't see the other end of the gauge
3\ if it is my block thanks for that as that what I'm selling it at so that will be a great help thanks
Finally I didn't say anything that I wasn't told I never said that they wasn't untouched you must have been talking to someone else and got me mistaken I said that I had them measured and was 92.225 and you was happy to buy after i really insisted on you coming to pick them up so you can inspect them so we wouldn't of had the bull siht but even if you had you still would have brought them as you have no idea at all.without mentioning names but these was measured by a very well respected tuner for on here and I brought them form a well respected member from here to they no who they are and if you want to add be my guest you also said to PayPal that these wasn't fit for purpose ?? At the measurement you are showing in the picture you can build a very strong engine with these blocks so wrong again
#16
I did get a FULL refund from PayPal & I do have screen shots stating ALL the facts from PM's along with other documentary evidence, last post on the subject from me, time to move on!
#20
Scooby Regular
iTrader: (7)
Join Date: Dec 2009
Location: Surrey
Posts: 2,008
Likes: 0
Received 0 Likes
on
0 Posts
I'm going to have my two pence worth.
All i can say is what a top bloke!!
I've bought a couple of things from him and asked him to ring me about the engine. He gave me the full story and history and even the info about the seller above prior to the comments posted above.
If you're interested PM him and i'm sure it'll put any doubts you have to rest.
PS i didn't buy in the end only as the power i'm chasing i don't actually need this set up.
All i can say is what a top bloke!!
I've bought a couple of things from him and asked him to ring me about the engine. He gave me the full story and history and even the info about the seller above prior to the comments posted above.
If you're interested PM him and i'm sure it'll put any doubts you have to rest.
PS i didn't buy in the end only as the power i'm chasing i don't actually need this set up.
#21
I'm going to have my two pence worth.
All i can say is what a top bloke!!
I've bought a couple of things from him and asked him to ring me about the engine. He gave me the full story and history and even the info about the seller above prior to the comments posted above.
If you're interested PM him and i'm sure it'll put any doubts you have to rest.
PS i didn't buy in the end only as the power i'm chasing i don't actually need this set up.
All i can say is what a top bloke!!
I've bought a couple of things from him and asked him to ring me about the engine. He gave me the full story and history and even the info about the seller above prior to the comments posted above.
If you're interested PM him and i'm sure it'll put any doubts you have to rest.
PS i didn't buy in the end only as the power i'm chasing i don't actually need this set up.
#28
EJ22 CDB
EJ22 CDB testing the water
Hi I have a very good 22B CDB for sale although im just testing the water as still undecided weather to sell so if you want it its got to be £1200 P&P and fees or cash on pickup I would rather you come and see before you buy it's at slowboy racing at the moment but I will go and pick it up if there's any interest :-)
If this does sell I will have some big port avec heads or sale to :-)
Hi I have a very good 22B CDB for sale although im just testing the water as still undecided weather to sell so if you want it its got to be £1200 P&P and fees or cash on pickup I would rather you come and see before you buy it's at slowboy racing at the moment but I will go and pick it up if there's any interest :-)
If this does sell I will have some big port avec heads or sale to :-)
Last edited by johnnybon; 24 May 2013 at 07:52 AM.