Spec c engine and forged part's.
#1
Spec c engine and forged part's.
Im putting my original spec c engine block halve's up for sale.
The bores are standard 92.0 mm no mark's at all.£sold
I also have a set of cossie rods they have done no more than 1500 miles. £400
Spec c 2.0 litre crank engine was spot on before removal and was run at 370bhp. £sold
Pics availbale
The bores are standard 92.0 mm no mark's at all.£sold
I also have a set of cossie rods they have done no more than 1500 miles. £400
Spec c 2.0 litre crank engine was spot on before removal and was run at 370bhp. £sold
Pics availbale
Last edited by BIG FUD; 06 March 2013 at 09:16 PM.
#2
Just the COSWORTH SUBARU IMPREZA WRX STI EJ20 EJ25 H BEAM FORGED CONNECTING RODS CON RODS
The connecting rod is the vital link between the piston and power. When engine output is increased, the demands placed on the connecting rod increase as well. To ensure engine reliability in all conditions, original connecting rods should be replaced with heavy duty specification parts. Cosworth Forged Connecting Rods are manufactured from high strength 4340 (EN24) steel and machined to exacting tolerances.
Fits Subaru Impreza WRX STI EJ20 & EJ25 engine.
Features:
Rods include genuine Cosworth H11 tool steel rod bolts (260,000psi)
Proprietary forging made in the USA
Detailed machined work to maintain optimum weight and strength
Solid beam design for high power applications
The connecting rod is the vital link between the piston and power. When engine output is increased, the demands placed on the connecting rod increase as well. To ensure engine reliability in all conditions, original connecting rods should be replaced with heavy duty specification parts. Cosworth Forged Connecting Rods are manufactured from high strength 4340 (EN24) steel and machined to exacting tolerances.
Fits Subaru Impreza WRX STI EJ20 & EJ25 engine.
Features:
Rods include genuine Cosworth H11 tool steel rod bolts (260,000psi)
Proprietary forging made in the USA
Detailed machined work to maintain optimum weight and strength
Solid beam design for high power applications
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
blockhead
Subaru Parts
19
07 November 2015 11:50 PM