When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just bought a set for myself and thought i would buy a few extra sets to sell on.. i can also get them for newage if any1 is intrested once there are a few people onboard i can get them in.
Fitted mine in about 15-20mins very straight forward, everything needed is supplied apart from the tools lol. No drilling required as they use you existing bolt holes, very simple but effective mod to make.
pics ....
if ur intrested please feel free to drop me a pm with any questions
looking for £47 per pet posted
Last edited by crazyspeedfreakz; 02 April 2013 at 09:15 PM.
The dampers are unbranded but look very similar to the ones japspeed sell on there website for a few extra quid ... I also no of a eBay seller also selling these for more than what i have them up for, again at least £7/£8 diffrence to what I've priced them at.
The gas dampers are made to a high standard and comes as a complete kit all brackets etc included, as I said before I have fitted a set to my type r and was very happy with the ease of fitment and build quality.
I have excellent it itrader feedback also any1 not compleatly happy with the dampers I will more than happily give a FULL refund to, that's how confident I am in them ..
What you need to do to fit to the Type R mate, do they use existing bolt holes or is there drilling involved??
No drilling involved .. In short u remove the top bolt that is connected to the bonnet and place a bracket behind it ... Then remove the second or third bolt down on the wing and replace with a new 1 supplied in the pack and then u just connect the damper, it's very simple and is supplied with instructions as I said before took me about 15/ 20 min and is very straight forward ..
07 September 2012, 11:17 AM
classic bonnet dampers
.. In short u remove the top bolt that is connected to the bonnet and place a bracket behind it ... Then remove the second or third bolt down on the wing and replace with a new 1 supplied in the pack and then u just connect the damper, it's very simple and is supplied with instructions as I said before took me about 15/ 20 min and is very straight forward .. 
