Exedy hyper carbon twin plate
#3
Scooby Regular
iTrader: (11)
It will Fit Both, the Hyper comes complete with flywheel.
even if it was a 6 speed u could grind the gearbox casing on a 5 speed box and it will fit.
@Boost luver how was this on your car? I previously fitted one to my Business partners scooby, and as it was only 400 BHP it kept slipping because we could not keep the required heat in the clutch.
If i recall the instructions say 2-3 5 second slips of the clutch in the morning and every time it gets cold?
We found it a pain so removed for a cerametalic twin plate.
I am now going for 550 so may be a good option for me now.
Let us know how much meat is left, and can we have plenty of pics please of each section stripped down.
even if it was a 6 speed u could grind the gearbox casing on a 5 speed box and it will fit.
@Boost luver how was this on your car? I previously fitted one to my Business partners scooby, and as it was only 400 BHP it kept slipping because we could not keep the required heat in the clutch.
If i recall the instructions say 2-3 5 second slips of the clutch in the morning and every time it gets cold?
We found it a pain so removed for a cerametalic twin plate.
I am now going for 550 so may be a good option for me now.
Let us know how much meat is left, and can we have plenty of pics please of each section stripped down.
#5
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Apr 2012
Location: staffordshire
Posts: 573
Likes: 0
Received 0 Likes
on
0 Posts
@broxi hi there the clutch feels fantastic in the car the pedel feels like oem and after a few miles it's quiet for a twin plate, in about 3000 miles it has slipped twice I rang exedy they confirmed that they do require "slight" heat to get the best performance, in my case as soon as it did slip I let off changed gear and it was fine..never had any juddering from it, was removed from a customers car that did about 500 miles the guy wrote the car off so it was stripped fir parts I then had it fitted to my classic as its comes as a kit flywheel included, since then iv done about 3000 miles light use only running about 300bho and my mrs drives it a lot.
Apparently I have the newer carbon plates with a special coating on them to get rid of the slipping problem which from what iv read has worked.
Hopefully the clutch should be out tomorrow if the garage fine time to take it out, i will take pictures of each piece of the clutch, there has been a lot of interest in this so the first decent off made and paid gets it then no one is let down.
Apparently I have the newer carbon plates with a special coating on them to get rid of the slipping problem which from what iv read has worked.
Hopefully the clutch should be out tomorrow if the garage fine time to take it out, i will take pictures of each piece of the clutch, there has been a lot of interest in this so the first decent off made and paid gets it then no one is let down.
Last edited by Boost luver; 08 June 2012 at 01:48 AM.
#7
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Apr 2012
Location: staffordshire
Posts: 573
Likes: 0
Received 0 Likes
on
0 Posts
Iv got 1 in my evo (not carbon) and that is heavy on the pedel and really noisy been like that for 2 years!
As you say very good and silly money new I believe new plates when needed are only £380 delivered from indigo gt
As you say very good and silly money new I believe new plates when needed are only £380 delivered from indigo gt
Trending Topics
#9
Scooby Regular
iTrader: (11)
Same one I Had. Let us know how much meat is left,. and get the pic up plz.
https://www.scoobynet.com/private-fo...lutch-kit.html
https://www.scoobynet.com/private-fo...lutch-kit.html
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM
speedrick
Subaru Parts
0
26 September 2015 03:01 PM