Newage/Classic bits and bobs.
#1
Newage/Classic bits and bobs.
Alright chaps, just doing a bit of a clear out as the missus doesn't appreciate parts on the dinning room table
First up is a decat downpipe. I bought this of a member not a week ago but it turns out it doesn't fit my system. Its a 3'' bell mouth to 2.5'' ish. I say ish because I don't have any callipers to measure as you can see from the picture. It does have a cone gasket on it but would advise on a new one. I believe this will fit a classic as the guys at scooby clinic who tried to fit it said that's what it looks like it would fit. The only reason it wouldn't fit my system was it was to short. £70 plus postage or collected.
Next is my old air box snorkle off a blobeye. £20 plus postage or collected.
Lastly is my TD04. Its done 79K with no play in the shaft or cracks. £60 plus postage or collected.
Any questions give me a shout
First up is a decat downpipe. I bought this of a member not a week ago but it turns out it doesn't fit my system. Its a 3'' bell mouth to 2.5'' ish. I say ish because I don't have any callipers to measure as you can see from the picture. It does have a cone gasket on it but would advise on a new one. I believe this will fit a classic as the guys at scooby clinic who tried to fit it said that's what it looks like it would fit. The only reason it wouldn't fit my system was it was to short. £70 plus postage or collected.
Next is my old air box snorkle off a blobeye. £20 plus postage or collected.
Lastly is my TD04. Its done 79K with no play in the shaft or cracks. £60 plus postage or collected.
Any questions give me a shout
Last edited by Kedlestone; 08 May 2012 at 08:13 PM.
#4
The ecu has been mapped with,
Cat back
Green cotton panel filter
Turbosmart vee port dump valve
Mapped for v-power
Duncan was the mapper, I believe any map tweaks are cheaper once I had my first map, £150 if my memory is correct? Best contact him to be sure if your interested.
Cat back
Green cotton panel filter
Turbosmart vee port dump valve
Mapped for v-power
Duncan was the mapper, I believe any map tweaks are cheaper once I had my first map, £150 if my memory is correct? Best contact him to be sure if your interested.
#5
Scooby Regular
iTrader: (4)
The ecu has been mapped with,
Cat back
Green cotton panel filter
Turbosmart vee port dump valve
Mapped for v-power
Duncan was the mapper, I believe any map tweaks are cheaper once I had my first map, £150 if my memory is correct? Best contact him to be sure if your interested.
Cat back
Green cotton panel filter
Turbosmart vee port dump valve
Mapped for v-power
Duncan was the mapper, I believe any map tweaks are cheaper once I had my first map, £150 if my memory is correct? Best contact him to be sure if your interested.
HKS panel filter
STi Up pipe (to be fitted)
Down pipe (to be fitted)
Cobrasport catback
Momentum 99
All this on a 2001 Bug WRX.... if this would work it would be cheaper than the £500 initial remap from Bob i take it???
How much you looking for the ECU
Last edited by GIBZY; 03 May 2012 at 10:14 PM.
#6
Yes I believe it would be a lot cheaper but check with your mapper first. Like I mentioned Duncan did mine so not sure if he has a passlock on it or something along those lines. Might be worth givin him a shout just to make sure, wouldn't want to sell you the wrong thing. With the map I'd probably look for £150 plus postage, the map cost £350 to let you know.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post