Uprated newage induction parts/DV/ECU
27 September 2010, 09:09 PM
#1
Uprated newage induction parts/DV/ECU
Due to various recent upgrades and changes, I have the following parts for sale. Prices include delivery within the UK and paypal, as purchase not gift 
- 80mm RCM intake trumpet with newage MAF mounting boss. Will need K&N cone filter and samco joiner. RCM new price is £75+delivery, yours for £30 SOLD
- Newage MAF. £65.
- Red Samco 76mm turbo intake pipe. Currently has the breather system takeoff spigots blocked off but they are easily unblocked, it's a bit grubby, but does the job. New price is £225, yours for £100. SOLD
- '05 JDM STi ECU (no case) with ecutek licence. Same pinout as '05 onwards UK ECU, but suggest you check with your mapper that it will work for you. £200.
- APS High Volume Twin Vent Blow Off Valve. Intended for FMIC application, and has the adapter fitted to allow the standard recirc pipe to connect directly. Mounting bracket could do with re-painting. Cleaned and re-greased. £65.
Last edited by TimH; 06 January 2011 at 10:13 PM.
28 September 2010, 09:50 AM
#3
No - it's 6 years old and done 75,000 miles but works absolutely OK. Was in use on my car until last week when I went MAF-less.
As it happens, I also temporarily swapped it for another known-good MAF a few months ago when eliminating possible causes of some issues I had, and both MAFs behaved the same.
As it happens, I also temporarily swapped it for another known-good MAF a few months ago when eliminating possible causes of some issues I had, and both MAFs behaved the same.
Trending Topics
02 January 2011, 05:47 PM
#10
Not sure tbh - the trumpet is 80mm diameter, and I used it with an angled reducer pipe, as per photo, that connected from the 80mm trumpet to the 76mm Samco pipe.
FYI, you will absolutely need a remap if you move from the stock MAF housing to this 80mm one as the MAF will need rescaling.
FYI, you will absolutely need a remap if you move from the stock MAF housing to this 80mm one as the MAF will need rescaling.
03 January 2011, 12:36 PM
#18
Scooby Regular
iTrader: (7)
Join Date: Oct 2010
Location: Live on a rock in the middle of the irish sea
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Thank you
this is the best pic online i can find with some info
http://www.just-subaru.com/my06-07-z...e-79076-0.html
this is the best pic online i can find with some info
http://www.just-subaru.com/my06-07-z...e-79076-0.html
03 January 2011, 01:43 PM
#20
Thank you
this is the best pic online i can find with some info
http://www.just-subaru.com/my06-07-z...e-79076-0.html
this is the best pic online i can find with some info
http://www.just-subaru.com/my06-07-z...e-79076-0.html
03 January 2011, 01:48 PM
#21
The slight discolouration on the mounting flange is insignificant, as the seal is "inboard" of it, if you see what I mean.
and fitted
Thread
Thread Starter
Forum
Replies
Last Post