EJ20g and 2.1 stroker parts
#1
Scooby Regular
Thread Starter
EJ20g and 2.1 stroker parts
Now I have replaced my engine, I am selling the old unit. This engine was diagnosed with bearing failure due to finding some shimmer in the oil but once it was opened up everything looks good. There are some signs of wear though and I will get pictures up as soon as I have a chance.
EJ20g closed deck block halves. Rear thrust converted. Currently bored to take a 92.5 piston. I would recommend a rebore and hone. SOLD
V8 UK spec STi AVCS heads. Only covered 46k miles. No cracks at all and very well maintained. Make a nice upgrade or replacement as in fantastic condition. £700
Mahle 92.5 2618 pistons. £350 Sold pending payment
Williams Racing I-beam forged rods with ARP bolts. £250 Sold pending payment
EJ257 Nitride crank. No wear and not been polished. £200 Sold pending payment
ARP 11mm head studs. £150 Sold pending payment
Sump with pick up and dip stick £30
Engine mounts £25
Prices are collected and don’t include any PayPal fees. Smaller items can be posted but I’d prefer not to ship the heads or block halves. I could meet half way if not too far.
If you want to take it all as a package, then I’m willing to discuss an ‘all in’ price.
Pictures will be up in the week when I have a chance to unbox it.
EJ20g closed deck block halves. Rear thrust converted. Currently bored to take a 92.5 piston. I would recommend a rebore and hone. SOLD
V8 UK spec STi AVCS heads. Only covered 46k miles. No cracks at all and very well maintained. Make a nice upgrade or replacement as in fantastic condition. £700
Mahle 92.5 2618 pistons. £350 Sold pending payment
Williams Racing I-beam forged rods with ARP bolts. £250 Sold pending payment
EJ257 Nitride crank. No wear and not been polished. £200 Sold pending payment
ARP 11mm head studs. £150 Sold pending payment
Sump with pick up and dip stick £30
Engine mounts £25
Prices are collected and don’t include any PayPal fees. Smaller items can be posted but I’d prefer not to ship the heads or block halves. I could meet half way if not too far.
If you want to take it all as a package, then I’m willing to discuss an ‘all in’ price.
Pictures will be up in the week when I have a chance to unbox it.
Last edited by adam.pah; 26 March 2021 at 01:16 PM.
#2
Scooby Regular
Thread Starter
The block is in very good condition. We left the bearings in place to show no bearing failure. the bores are mostly smooth with some shallow marks right at the top most likely caused by some previous det. Will be perfect with a re-bore.
#3
Scooby Regular
Thread Starter
Heads are in excellent condition with no cracks and only 46k road miles. I haven't cleaned them up so they are as removed.
#4
Scooby Regular
Thread Starter
I gave the pistons a quick scrub with parts cleaner and a scotch pad. A couple of them have very slight marking on the side of the crown that I've tried to picture but this shouldn't effect function. modified to fit around the CDB oil squirters.
#5
Scooby Regular
Thread Starter
#6
Scooby Regular
Thread Starter
#7
Scooby Regular
Thread Starter
Need a clean but other good and usable.
Trending Topics
#8
Scooby Regular
Thread Starter
#9
Scooby Regular
Thread Starter
List updated. Heads still available. Make me an offer...
Thread
Thread Starter
Forum
Replies
Last Post