When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1, Spec D 6 speed DCCD box to include, linkage with ASP poly bushes, cradle with 5 speed mount (will need 6 speed mount), propshaft, x2 front Hawk WRX shafts, x2 Rear R180 shafts, 6 speed starter, slave cylinder and goodridge clutch hose. (Cradles are all the same it's only the mount that changes so you would need to change this for a 6 speed mount
Two front newage WRX hubs These don't have any dust shields fitted
Two rear newage R180 100 PCD hubs with whiteline motorsport bushes again these don't have dust shields fitted inc brake shoe set up and cables.
Hawk sti rear LSD
WALBRO INTANK PUMP GC8: £60
Brand new in box
IMPORT CAR PARTS 5 SPEED LINKAGE REBUILD KIT: £55
This retails at over 70 pounds plus deliver on icp’s website
I WILL BE POSTIND LOADS MORE PARTS AS I SORT THEM OUT SO KEEP CHECKING THIS THREAD!!!
If you have any questions please ask. Price is pounds, plus delivery and plus PayPal fees unless you want to gift money.
Last edited by 52dwagon; Feb 12, 2018 at 04:24 PM.
Can vouch for most of the items here. The dampers were off my race RA and have only done 4 sprints you would be lucky to be able to tell they had been used apart from witness marks where they were bolted to the hubs. These are a bargain.
The 6 pot AP's I had professionally fully refurbished, stripped back to bare metal Pistons seals etc replaced then repainted which was not cheap these have also only done 4 sprints since the refurb. The pads are Pagid RST3 and there are two sets one part worn and one done 4 sprints these are over £250 a set. The rotors are Performance Friction and again done 4 sprints. Don't confuse these calipers with the cheaper CP7040 kits.
Can vouch for most of the items here. The dampers were off my race RA and have only done 4 sprints you would be lucky to be able to tell they had been used apart from witness marks where they were bolted to the hubs. These are a bargain.
The 6 pot AP's I had professionally fully refurbished, stripped back to bare metal Pistons seals etc replaced then repainted which was not cheap these have also only done 4 sprints since the refurb. The pads are Pagid RST3 and there are two sets one part worn and one done 4 sprints these are over £250 a set. The rotors are Performance Friction and again done 4 sprints. Don't confuse these calipers with the cheaper CP7040 kits.
Thank you Archie, I’m gutted that they need to go!
1, Spec D 6 speed DCCD box to include, linkage with ASP poly bushes, cradle with 5 speed mount (will need 6 speed mount), propshaft, x2 front Hawk WRX shafts, x2 Rear R180 shafts, 6 speed starter, slave cylinder and goodridge clutch hose. (Cradles are all the same it's only the mount that changes so you would need to change this for a 6 speed mount
Two front newage WRX hubs These don't have any dust shields fitted
Two rear newage R180 100 PCD hubs with whiteline motorsport bushes again these don't have dust shields fitted inc brake shoe set up and cables.
Hawk sti rear LSD
TOUCAN DIPLAY: £200
Casing has been plastidipped, and has a small scratch on screen which is hardly visible when screen is lit up, it innovations quoted 70£ for new cover and full diagnostics check while it was with them, syvecs lead
WALBRO INTANK PUMP GC8: £60
Brand new in box
IMPORT CAR PARTS 5 SPEED LINKAGE REBUILD KIT: £55
This retails at over 70 pounds plus deliver on icp’s website
I WILL BE POSTIND LOADS MORE PARTS AS I SORT THEM OUT SO KEEP CHECKING THIS THREAD!!!
If you have any questions please ask. Price is pounds, plus delivery and plus PayPal fees unless you want to gift money.
gc8 full 6 speed conversion, toucan screen, fuel pump, 5 speed linkage kit
