STi6 RA Limited for sale
#1
Scooby Regular
Thread Starter
iTrader: (8)
Join Date: Dec 2004
Location: Cambridge
Posts: 592
Likes: 0
Received 0 Likes
on
0 Posts
STi6 RA Limited for sale
STi6 RA Limited, year 2000, the light-weight one with rear-biased power and adjustable centre diff, with roof vent, elec windows and aircon, plus blue Alacantara seats and dash surround.
Mature owner for last 4 years, 74k miles with extensive history, carefully modified for fast road use: intention was to build the best possible real-world classic for the road, ie great suspension, strong brakes, really usable power and subtle noise. The car wants for nothing.
Stock springs and single-adjustable Ohlins dampers (recently rebuilt), Whiteline ARBs, Whiteline adj rear arms, recent geometry. Rear strut brace, front carbon fibre strut brace (standard item) and front underbody 4-point brace.
AP 4-pots, newish AP disks and custom bells at front. Standard 2-pots at rear, newish standard Subaru vented disks. Pads are Alyn's best recommendation, Pagid I think, which have strong bite cold or hot.
Choice of spotless genuine bronze Rays TE37 17" wheels with RE070 tyres or silver Rota 17" PFF7 replicas fitted with the excellent Federal RS-R tyres.
Engine - forged rebuild 15k miles ago, with Mahle pistons, Manley rods, cometic gaskets, ARP headstuds and ACL race bearings. Last dyno'd at 360 but should be around 380bhp now. Apexi PFC recently mapped by Paul at Zen, with Apexi AVC-R boost controller. Rebuild was by Adrian Spencer (Adge) http://www.adgespeed.co.uk/ and has been faultless.
K&N 57i air filter
Oversize silicone inlet pipe
Lateral Performance MD321H turbo with blanket
Hybrid front mount intercooler
Power Enterprises 550 injectors
Walbro 255lph fuel pump
Fuelab adj pressure regulator
PFR7b plugs
Breathers to RCM catch-tank with return to sump
Cosworth baffle plate above sump
Lightweight pulleys
Harvey-ported standard headers and matched up-pipe
3" open-neck wrapped decat downpipe
3" Revolution full system (nice, it's the quietest 3" on the market)
Oil cooler
Samco blue hoses
Millers CFS 10w60 oil
Gearbox is standard 5spd with the longer 5th, in good order with recent Exedy single plate uprated organic clutch and 6kg Exedy flywheel.
Professionally detailed last week.
Reverse bonnet vent plus original scoop
P1 front lip, blue colour-matched 'wedges', clear indicators and repeaters
High-level spoiler, with optional plain bootlid with BMW-type lip
Interior has Alpine CD radio with Infinity Kappa speakers, boost/oil pressure/oil temp/egt stepper gauges, Innovate permanent wideband gauge plus customisable readout on the AVC-R display. UK-spec folding rear seat currently fitted, which can be swapped out in 10mins for the original (JDM) fixed rear seat. Blue logo'd mat set plus original black mats.
Bad bits - both rear arches have slight bubbling just at the rear. The usual bonnet stone chips.
Looking for £5995 with the Rays and APs, or £5250 with Rotas and standard 4-pots.
Just south of Cambridge, M11 j9/10.
Boost, detalarm LEDs, charge temp and wideband
UK folding rear seat
Rays TE37
Mature owner for last 4 years, 74k miles with extensive history, carefully modified for fast road use: intention was to build the best possible real-world classic for the road, ie great suspension, strong brakes, really usable power and subtle noise. The car wants for nothing.
Stock springs and single-adjustable Ohlins dampers (recently rebuilt), Whiteline ARBs, Whiteline adj rear arms, recent geometry. Rear strut brace, front carbon fibre strut brace (standard item) and front underbody 4-point brace.
AP 4-pots, newish AP disks and custom bells at front. Standard 2-pots at rear, newish standard Subaru vented disks. Pads are Alyn's best recommendation, Pagid I think, which have strong bite cold or hot.
Choice of spotless genuine bronze Rays TE37 17" wheels with RE070 tyres or silver Rota 17" PFF7 replicas fitted with the excellent Federal RS-R tyres.
Engine - forged rebuild 15k miles ago, with Mahle pistons, Manley rods, cometic gaskets, ARP headstuds and ACL race bearings. Last dyno'd at 360 but should be around 380bhp now. Apexi PFC recently mapped by Paul at Zen, with Apexi AVC-R boost controller. Rebuild was by Adrian Spencer (Adge) http://www.adgespeed.co.uk/ and has been faultless.
K&N 57i air filter
Oversize silicone inlet pipe
Lateral Performance MD321H turbo with blanket
Hybrid front mount intercooler
Power Enterprises 550 injectors
Walbro 255lph fuel pump
Fuelab adj pressure regulator
PFR7b plugs
Breathers to RCM catch-tank with return to sump
Cosworth baffle plate above sump
Lightweight pulleys
Harvey-ported standard headers and matched up-pipe
3" open-neck wrapped decat downpipe
3" Revolution full system (nice, it's the quietest 3" on the market)
Oil cooler
Samco blue hoses
Millers CFS 10w60 oil
Gearbox is standard 5spd with the longer 5th, in good order with recent Exedy single plate uprated organic clutch and 6kg Exedy flywheel.
Professionally detailed last week.
Reverse bonnet vent plus original scoop
P1 front lip, blue colour-matched 'wedges', clear indicators and repeaters
High-level spoiler, with optional plain bootlid with BMW-type lip
Interior has Alpine CD radio with Infinity Kappa speakers, boost/oil pressure/oil temp/egt stepper gauges, Innovate permanent wideband gauge plus customisable readout on the AVC-R display. UK-spec folding rear seat currently fitted, which can be swapped out in 10mins for the original (JDM) fixed rear seat. Blue logo'd mat set plus original black mats.
Bad bits - both rear arches have slight bubbling just at the rear. The usual bonnet stone chips.
Looking for £5995 with the Rays and APs, or £5250 with Rotas and standard 4-pots.
Just south of Cambridge, M11 j9/10.
Boost, detalarm LEDs, charge temp and wideband
UK folding rear seat
Rays TE37
Last edited by Andy916; 12 April 2013 at 08:23 AM.
Trending Topics
#8
Scooby Regular
iTrader: (78)
#9
Scooby Regular
Join Date: Nov 2012
Location: North East Subaru Forum
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Andy can you post some close up pics of the rear arch rust please.
Rob I have a guy very interested in my car and could sell it today for the full asking price of this one.
Rob I have a guy very interested in my car and could sell it today for the full asking price of this one.
Last edited by Natski; 17 April 2013 at 03:05 PM.
#10
Scooby Regular
Thread Starter
iTrader: (8)
Join Date: Dec 2004
Location: Cambridge
Posts: 592
Likes: 0
Received 0 Likes
on
0 Posts
If it's not too late, I'll be able to post a pic of the rear arch tonight.
I have interest in the car at lower spec, so am open to sensible offers on the bits that can be removed without spoiling the car :
AP CP5200 4-pots with newish AP disks and newish pads
Rays TE37 refurbed in bronze (mint) with good RE070 tyres
Blue mat set, near-new
Reverse scoop, spotless in sonic blue 74f
Underbody front 4-point brace
Rear strut-top brace
UK folding rear seat plus metal loops required for fitting
(edited as I originally said Rota when I meant Rays. The silver wheels are Rota)
I have interest in the car at lower spec, so am open to sensible offers on the bits that can be removed without spoiling the car :
AP CP5200 4-pots with newish AP disks and newish pads
Rays TE37 refurbed in bronze (mint) with good RE070 tyres
Blue mat set, near-new
Reverse scoop, spotless in sonic blue 74f
Underbody front 4-point brace
Rear strut-top brace
UK folding rear seat plus metal loops required for fitting
(edited as I originally said Rota when I meant Rays. The silver wheels are Rota)
Last edited by Andy916; 23 April 2013 at 09:53 PM.
#11
Scooby Regular
Thread Starter
iTrader: (8)
Join Date: Dec 2004
Location: Cambridge
Posts: 592
Likes: 0
Received 0 Likes
on
0 Posts
This pic is the only one I have at moment, it shows the worst of the 2 rear arches:
On parts, looking for £600 for Rays TE37 + RE070s
and £600 for AP 4-pot kit (the disks and bells alone cost that, recently)
On parts, looking for £600 for Rays TE37 + RE070s
and £600 for AP 4-pot kit (the disks and bells alone cost that, recently)
#15
Scooby Regular
Thread Starter
iTrader: (8)
Join Date: Dec 2004
Location: Cambridge
Posts: 592
Likes: 0
Received 0 Likes
on
0 Posts
As above I'm looking for towards £6k for everything, and that would include original and reverse scoops, original boot/wing and subtle-lip boot, original rear seat and UK folding one, and original black mats plus the blue ones.
Car can be viewed Sunday pm.
Car can be viewed Sunday pm.
Last edited by Andy916; 26 April 2013 at 10:48 AM.
#19
Scooby Regular
Thread Starter
iTrader: (8)
Join Date: Dec 2004
Location: Cambridge
Posts: 592
Likes: 0
Received 0 Likes
on
0 Posts
Car now sold, but a few bits left over:
Mint (refurbed) Rays TE37 17" as pictured with good RE070 tyres £600ono, collection from CB10 1SD
FC-Datalogit with USB cable and software £175 delivered
Blue mat set, as pictured, v.clean £25ono + postage
Sonic blue bonnet mini-scoop (above air-filter) £25 delivered
Plain boot lid with holes welded/smoothed, needs paint, free on collection from CB10 1SD
BMW E46 type lip to fit plain bootlid £15 delivered
Mint (refurbed) Rays TE37 17" as pictured with good RE070 tyres £600ono, collection from CB10 1SD
FC-Datalogit with USB cable and software £175 delivered
Blue mat set, as pictured, v.clean £25ono + postage
Sonic blue bonnet mini-scoop (above air-filter) £25 delivered
Plain boot lid with holes welded/smoothed, needs paint, free on collection from CB10 1SD
BMW E46 type lip to fit plain bootlid £15 delivered
Last edited by Andy916; 07 October 2013 at 07:42 PM.
#21
Scooby Regular
Thread Starter
iTrader: (8)
Join Date: Dec 2004
Location: Cambridge
Posts: 592
Likes: 0
Received 0 Likes
on
0 Posts
Hi Joe, you need the rear arches rolled to run 225s then they're fine. They run true and have no damage - they're virtually mint (refurbed when I bought them from Wuz on 22b). Although there are quite a few weights on there, the fitter didn't comment at all and they drive fine.
Thread
Thread Starter
Forum
Replies
Last Post
supshon
General Technical
2
03 October 2015 08:06 PM