bigbaz1974

Hi,

Can anyone tell me where i can get a decent lower grille for my blobeye, i bought an upper and lower matching zunsport grille but was unable to fit the lower one due to my front mount intercooler being in the way, I have seen prodrive ones in magazines which look great but cant seem to source them do prodrive still supply them

Cheers

stevep360

iTrader: (20)

https://www.facebook.com/#!/photo.ph...type=3&theater


some cutting and some self tappers

bigbaz1974

cheers for that but the lower part of my bumper where the lower grille goes doesnt have the black plastic part,its been removed so a zunsport lower grill doesnt cover to whole space

Cannon Fodder

iTrader: (100)

I would be very interested as well as I have a APS FMIC and the black bar has been removed from my bumper as well, I did think about getting a WR1 lower grille but it can't be fitted to my bumper.

Dutch Scooby lover

iTrader: (3)

Would this work??
http://www.grillcraft.com/applicatio....aspx/1|5/245/

It seems to be as far forwards as possible.

ScoobySteve69

iTrader: (13)

But he hasn`t got the `black bar` so needs the mesh to be higher I think he means.

Hammer man

iTrader: (25)

Halfords "diy" job....£25

http://www.halfords.com/webapp/wcs/s...egoryId_165675

B0DSKI

iTrader: (17)

I'm running a Perrin FMIC with a Prodrive lower grill kit. They crop up on Ebay occasionally. Prodrive stopped making them a while back

5doorbullet

iTrader: (1)

Halfords diy job x2

hoyty

Zune sport do a full size lower grill now so it covers the black plastic when fitted when it's not it fills the hole nice just have to be ingenious with the securing

LegacySTi

iTrader: (13)

Prodrive one fitted with a HDi Hybrid FMIC

Littleleigh

iTrader: (4)

How did you make the 'halfords' grilles look neat? The're good in the pik but can't really tell.
Thanks

wrx9181

iTrader: (2)

Zun sport

Hammer man

iTrader: (25)

I removed the bumper, masked up the line I wanted to cut out,(tape to the painted edge you want to keep) measured it to make sure it looked symetrical, then slowly cut it out with an "all-rounder".The corners are the worst bits. Then file the edges smooth and measure out the grill from Halfords to about 1cm bigger around the edge. I then hot-melt glued mine into place but you could use any strong glue that will cope with metal to plastic. Clean and prepare the inner bumper first..... from the outside it looks neat and tidy, thats all that mattered to me. Its not that hard to do, just take your time

Littleleigh

iTrader: (4)

Thanks will have a blast.