HT AUTOS FRONT SPLITTER?
#1
Scooby Regular
Thread Starter
Join Date: Feb 2006
Location: south wales
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
HT AUTOS FRONT SPLITTER?
hi guys, any of you fitted a ht autos front splitter to a 04 wrx? are they easy to fit? do they come with fixings? thinking about getting one for mine. cheers. also any pics of it fitted?
#4
Easy enough to fit yes once you know what your doing !!
You should find the 4 main lugs towards the front of the bumper line up with the lugs in the "corner" of the splitter. Pull these out and attach the splitter to the car using these 4 lugs.
Once it's on the car, you can use self tapping screws or bolts with washer's nuts to secure it to the car better, I stuck a couple of extar one's in the front and one at either end by the wheels and mine's rock solid.
You should find the 4 main lugs towards the front of the bumper line up with the lugs in the "corner" of the splitter. Pull these out and attach the splitter to the car using these 4 lugs.
Once it's on the car, you can use self tapping screws or bolts with washer's nuts to secure it to the car better, I stuck a couple of extar one's in the front and one at either end by the wheels and mine's rock solid.
#5
I could be wrong but I think you might need the STI winglets to fit one to a WRX unless they now do a specific splitter to fit WRX's, HT Auto's also sell the winglets.
Fitting the splitter to a blobeye STI is easy, the pre drilled holes in the splitter line up with existing holes in the bumper .
Sounds like the Hawkeye version fits differently.
Fitting the splitter to a blobeye STI is easy, the pre drilled holes in the splitter line up with existing holes in the bumper .
Sounds like the Hawkeye version fits differently.
#7
Scooby Regular
iTrader: (4)
Join Date: Feb 2002
Location: Cambridge
Posts: 2,611
Likes: 0
Received 0 Likes
on
0 Posts
They are a doddle to fit mate, won't take long... DO NOT bond the splitter to the car, I had to have my car aligned the other day and the splitter had to come off as the lasers on the wheels wouldn't come down far enough to get under the car with the splitter on.
Trending Topics
#8
Scooby Regular
iTrader: (32)
Join Date: Jan 2007
Location: brecon
Posts: 2,545
Likes: 0
Received 0 Likes
on
0 Posts
me and spannersfitted ht autos splitter easily to my blob w r x all the holes lined up perfect .the 4 black lugs in the middle pulled them out and fitted back first then the rest was just put nuts and bolts on.i just bought some bolts that lock on in case the originals rattled loose (cost pence)
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM