Pyrotechnic

iTrader: (1)

I've got some new wingmirrors for my 52 Bugeye, but I'm having no luck remving the old ones :[

I've taken the trim cover off the inside and removed the 3 screws that I can see, and that seem to match up to the new ones, but they won't budge at all, this is the same on both sides :/

Any ideas?

Thanks

tanyatriangles

iTrader: (2)

They been glued in place?
Mine came off a classic with the three screws plus disconnecting the wiring

RED2

mine too, thats strange.

baz999

Pyrotechnic

iTrader: (1)

Hmm, interesting, looks like some more trim needs removing. Thanks for that, I'll give it a try tomorrow :]

RED2

ah beaten to it, had a look at the mirrors ive taken off and indeed there are four well done that man

ABW

iTrader: (1)

There's one at the front of the mirror which is in the door frame and not under the triangular trim , usually black . you'll need the door pad off to disconnect the electrics

obey1

iTrader: (24)

i have a problem with my classic folding mirrors they seem to be loose flapping about at speed lol the three screws dont seem to be loose underneath so what else can it be any suggestions are they fookd

Pyrotechnic

iTrader: (1)

Yep, tiny 7mm bolt hiding in the door. Got the passenger side off but didn't have time to start playing with the electrics, so it went back on ;]