right hear goes ..im going to fit side skirts to my RA i know i will have to drill holes in the sill to fit but on the face off the sideskirts there are small lugg type things that go into to the sill yeh

right the thing is i dont want to dill the holes in the faceing off the sill on my car. i want to be able to take them off and dont want holes showing on the sills. i can get small gromet type thing for the hole under the sills but dont want these for the face.... is the some kinda glue doubleside tape no more nails i could use to get the top half off the skirt flush without damaging the paint

hope that make some sence

 

 

COULD TRY SILKAFIX OR TIGERSEAL USEDFOR BODY MOULDINGS TRY A PAINT SHOP SHOULD BE ABLE TO ADVISE
KIP

 

you think tigarseal would do anything to the paint on the sills

 

Not sure it may stain it ? dont know how easy it will be to get off either should be able to get all the info you need from paint suppliers
if not a good quality double sided tape like m3 might work
KIP

 

If you put them on with tigerseal - they won't be coming off again.

You will probably break the skirts trying to pull them off, so you would need to cut along the bonding.
This will leave such a mess, the sills will need rubbed down and repainted.

 

yeh thats what i was thinking tigerseal is some stong s**t

i will have a look in B&Q thay must have some sorta strong double sided tape

then the paint shop

 

Can remove Tigerseal with heatgun and fishing line.
Rub down with white spirit to remove excess!

 

Have you thought of the double-sided pads sold to fit numberplates?

Alcazar

 

i will look into that to might need alot